Search results

Both great products, however the formula is slightly different on the white version now, so there are some difficulties spraying. The grey goes through absolutely fine. I do know the white is being adjusted however. Both products are still stocked at P1 and we would be happy to provide prices...

Just 2 days to go…. ⏰ The Plasterers One Stop Shop OPEN DAY ⤵️ At our store in Cheltenham between 9:30am - 3:30pm this Friday. What’s on the schedule? * PRB Superbrut application, EWI talk through (including Fondisol application) and Renomur pull off test * Semin drylining and airless...

Normally this is down to a couple of things. Unmixed material due to a lack of water in the mix, or you could simply be scraping back too late. What machine are you using, water setting and what’s the bar pressure on the pressure gauge showing? Also, the length of pipe you are using.

The phone call for that will be happening… But whilst I’m on it, the M-tec M330 will pump approximately 5/6tonne per hour…

Mapei Ultraplan Renovation.

A small investment when you see the potential it can provide you.

P1 are excited to announce that we have taken over distributions of the Bennu range, including the X15 Carbon Spray Gun! Ryan Hill, Director at P1 has said “We are so excited about our fantastic acquisition of a brand that is so highly thought of within the industry, and look forward to...

The new low residue Tape has had excellent feedback for us: https://www.plasterers1stopshop.co.uk/product/p1-eze-low-tack-residue-tape-50mm-x-50m/

Sadly not possible.

However you wish to look at it is your choice. Genuine mistakes can happen. He was charged for the wrong product - a pretty simply error. Well, we do clearly stock it as we sent it to him. What we don’t have, is the product saved on our system. Hence the reason for the error. Anyway, the...

With respect @Cockney1 you don’t understand what’s happened and are making assumptions. The issue has been sorted and won’t happen again. A new member of the team made an assumption, quite like you, and got it wrong.

Appreciate the message - as said, a mistake on our part, but something that will be fixed!

I raised a good point, you won’t get the job without it!

I wasn’t offering a credit note. I offered a credit - as in a refund with money back to him. When it’s an error like this, we wouldn’t retain any of the money as that’s not fair or correct. I have messaged @Rossi46 and advised him the office will be in touch, my message to the team was to...

A simple reason, it’s not a product loaded on our system or website. I was away on business so unavailable to ask and a wrong judgement on price was made. An easy fix on our internal system and something that shouldn’t have happened. All of our prices are normally listed online and we are...

Also @Rossi46 how is giving you a credit fobbing you off? How is publicly admitting to an error in anyway shape or form, fobbing you off?

Wow. Wow! I’m am truly shocked to be seeing this. And in truth, ashamed. So, my day today consisted of many things including my sons first sports day - which was a priority for me and I wasn’t missing. There were many things I had to sort out and arrange for other things, but as said, on a...

We can offer a great range on Plastering and Rendering beads

Completely understand your point and it’s something I have already raised with our supplier. But it will be down to purchase costs currently and order frequency/size. We don’t sell them, as I said, this is the first one is a very long time. However, saying this, I have been away and only...

Sorry for the late reply - I have been away in Jersey on business. @Rossi46 - I believe James has spoken to you and this has been dealt with? Obviously, I am disappointed to hear you're unhappy and feel hard done by here, but as always, I'm sure something can be sorted and resolved. We are here...

Yes, I truthfully do. The machines really are manufactured to an incredible specification It is worth noting the M200 240v is competitively priced in comparison to others.

We are based in Cheltenham and can arrange a specification from PRB and also put you in touch with local contractors. Please feel free to give us a call on 01242 236699 - ask for Ryan.

What’s the age of the machine? Does it have a safety reset.

Thank you for the tag @Tramp @john whittaker - we have the M-tec M200 240v due back into us shortly. What size projects are you undertaking? Please feel free to give me a call tomorrow on 07891460532 and I’ll be happy to discuss options

Cheltenham. If that’s too far, call up next week, place an order and ask for me - I’ll sort it out.

Come in store, you’ll get a T-shirt and a hat!

When I have previously questioned this, I have always been ignored. Having spoken to many people within the industry, we all ask how 1.5mm of a coloured cork offers thermal benefits more significant than an EWI system.

All flex trowels will warp over time, it’s a 0.3mm blade - if your NELA did it. Your Ox will also - NELA make the OX!

It’s also still made by NELA…… The “fabric” wearing out shouldn’t mean it’s a throwaway, it’s an added level of support for the bonded blade.

We can indeed. Best to call the office on 01242 236699 and we can arrange this for you

Yes Plenty in stock, please let me know if we can help

If you contact the team at PRB Systems, they will be able to offer a specification and a recommended installer in your area. This way you get a system and product warranty and assurance it’s a recognised contractor. Visit: www.prbsystems.co.uk and speak to the Technical Manager Steve Keitley.

Love it! Thanks for the order of a NELA product!

Lots like it out there!

You do realise we used to employ two ex Renderers doing our training? But yes, not there to teach that and is machine focused

You would be surprised how many people expect a full Rendering course.

I agree with you here. I always say the best tool in the armoury for the machine world is experience. And this isn’t something that comes quickly. The difficult thing about training is a famous thing called Cognitive Overload. We could make a whole day course on it, but, it would simply be a...

Unfortunately for you, your product knowledge is like your personal knowledge of me… Just reinforces your “opinions”……

No mate, what kept me up all night was the excitement of going down to Twickenham today. Have a great weekend all

I completely agree, listening to those with experience. But as I said, there are very who have honestly used both - correctly. Quite often an opinion is given without full knowledge. Our biggest feedback is return customers who add the same machine to their fleet. That speaks volumes.

I do like to raise to your bait in fairness. I also think you would be surprised how many m-tec and EZE machines are actually out there (and owned by forum members)

If you have experience and understanding of both. That is knowledge. Being able to share that knowledge through experience is power…. Otherwise. It is just simply your opinion.

Morning, I would be happy to discuss with you what machine we recommend, from the ranges we supply. We supply a range from Putzmeister, M-tec, and our brand, EZE. We are also the largest machine dealer in the UK and the official dealership for Putzmeister in the South West and South Wales. Full...

Crazy to think that. I mean, why would someone not do their job and what pays their bills..... It really is a mad world we live in.

Euromair are a good brand, but in my honest opinion, they are a way off PM.

Thanks Danny!

Realistically you require a minimum of 12KVA. The more power the better longevity for your units overall. At P1 we promote a 20KVA which is very well suited to these machines - very cost effective, well built with a two year warranty.

The Black Edition Flex is by far the most popular we have done, but it does take longer to break in. I would advise a little wet and dry down the edges, this should then be enough for you. It's a higher grade steel on the "BE" and they are narrower, so the FLEX is different to that of a MediFLEX

Both are different widths with different steel, which gives a different level of Flex.

The course doesn’t teach you how to Render. It teaches you how to use the machine.