Recent content by bilge

I have to take back what I said earlier as I was wrong, just looked at my own build from a few years ago and the socket does indeed go into the wall. Dont actually like the design because if there is a leak I want to see it and not have it possibly run into the cavity. Instead of the render...

Dont think so, by the time the 90 is fully home the radius will catch the render and the resulting pipe run will be too close to the wall. You need the joining socket and a single socket 90 like this https://www.screwfix.com/p/floplast-sp161-92-5-bend-single-socket-black/70115 they were idiots...

Agreed but I am only a DIY Daddy (@Cockney1 ) so my time is of no concern.

I got the 150mm centers from this forum, and knauf also says 150 butI think I should of actually staggered them along the joists according to knauf and 150 is only the edge and not mid board.

Thank you but I am just a DIY Daddy :inocente: @Cockney1

That's the specs - all be it I will grant you it is the specs for the peremiter and not mid board. And I used 150 everywhere. #boarding refesher course.

@Cockney1 :fuckyou::bailando::hola:

150 centers and not a mm more or less

Joists are staggered and the in between knoggins are at 1.2m so you are looking at the knoggings

Think there about 400

150mm centres as per guidelines. There was a debate about screw centres on this forum.

Ho yes I have re read and get it now -- you are recommending any silver ones. Thing is I dont think neither screwfix or toolstation had the right length in zinc. Why do you prefer zinc.

Don't get ya

Here you go. I scribed all the ceiling to wall edges to follow the wall and the barrel to wall join was shampherd to the wall, I also added some board adheasive behind the curve and at the ends.

The plasterboard is up. (y)