Recent content by ProofShield

  1. ProofShield

    Any brick slip teams near Andover?

    Hi guys, Looking for a small team that are confident with brick slip installation in the Andover area around the end of June and into July. Approx 400m2 of brick slips to be installed to 2 x domestic new builds (ICF). Training and guidance available! Rate is £70/m2 installation only...
  2. ProofShield

    Insulating lime based plaster

    Funnily enough, we can :) That's exactly what it is for. Will give you a highly breathable, insulated solution. Andy - ProofShield
  3. ProofShield

    Insulating Render 2024-01-15

    Data sheet for ProofTherm insulating render
  4. ProofShield

    Looking for someone in Sheffield to apply lime-based internal insulation

    Hi Mike, an alternative is our ProofTherm insulating render. Highly breathable, expanded Perlite based and using a lime binder.
  5. ProofShield

    Insulating lime render internal

    EPS and XPS have a thermal conductivity of approx 0.034 w/m2K. ProofTherm has a thermal conductivity of 0.06 w/m2k. Therefore you need 2x the thickness of ProofTherm if you want to match the insulating value of EPS or XPS. However, ProofTherm is highly breathable and provides a continuous...
  6. ProofShield

    Product Field Testing

    Looking at your 2nd picture on a small screen looked like it was block work covered with brick slips
  7. ProofShield

    Product Field Testing

    If it was testing of a brand new, untried product, then I'd agree. This product has been widely used across Europe but new to the UK, hence the reason we want UK feedback. Would love to send free product out across the UK for extensive trialling but it would a) upset all the wholesalers trying...
  8. ProofShield

    Product Field Testing

    I'll get in touch!
  9. ProofShield

    Product Field Testing

    You've done it in brick or brick slip finish...why would you want to render it?
  10. ProofShield

    Product Field Testing

    Absolutely...let me know an email address or phone number and I'll give you the full run down on it
  11. ProofShield

    Product Field Testing

    Tell me about it! We have a major European launch of another product that is really quite unique due for right now....just hope we don't miss the season entirely!
  12. ProofShield

    Product Field Testing

    Boys and girls, we're looking for a a few teams to field test our Monocouche range and give us proper, constructive feedback of how you get on with it under everyday UK conditions. We want to know how it mixed up, what it was like to work with, how it dried and how easy was it to finish along...
  13. ProofShield

    New Member

    Better late than never.... What calcs do you need people? We've got a thermal conductivity lambda now of 0.06w/m2k for the ProofTherm render. To work out the U-Value though we need to know the whole wall build up so that we can calculate the R Value of each element to get to a final U Value.
  14. ProofShield

    Thermal boards

    18mm ProofTherm, 2mm skim and paint. What's the total area and whereabouts in the country?
  15. ProofShield

    Hello from ProofShield

    Very roughly, the insulating value would be equivalent to approximately mm of EPS..
Top