Search results

  1. Rossi46

    Ritmo l

    Everything you need there @Tommy anderson
  2. Rossi46

    Eze k4 2019 machine for sale

    We’ll see :ROFLMAO:
  3. Rossi46

    Eze k4 2019 machine for sale

    @Vincey movin on up
  4. Rossi46

    Council charging for waste now!

    I’ve got some rubber moulds for garden gnomes. If I’ve got some mix left over I fill a gnome or two. Paint them up at weekends and sell them on eBay. No waste :numberone:
  5. Rossi46

    New in plastering?

    Don’t forget Tam’s Speedscam
  6. Rossi46

    Rendering over painted render

    It’ll work yeah. I think it’s easier to just scrim and pin it. It’s mechanically fixed then
  7. Rossi46

    Rendering over painted render

    Won’t work if the paint is oil based
  8. Rossi46

    Rendering over painted render

    Use a quality poly modded base and scrim and pin it. Then whatever you want on top.
  9. Rossi46

    Van

    Good vans I’ve got a limited LWB too. Much better than them Vivaro pieces of crap.
  10. Rossi46

    Silicone 1.5

    Depends on shade or sun. How much water you put in. How much primer is on. Just pick a better day Ste and get it on early you’ll be fine it’s still over 20c this week.
  11. Rossi46

    Prebagged for internal through machine

    U ain’t seen me. right
  12. Rossi46

    Prebagged for internal through machine

    CPI. Nice to skim on. Pretty cheap.
  13. Rossi46

    Meterage

    s**t to what some would do but it’s just me and an apprentice. No point floating more than I can skim
  14. Rossi46

    Meterage

    Never sprayed hardwall yet but I’d be ok with 30m2. Easy day.
  15. Rossi46

    Ritmo water flow

    Beat me to it
  16. Rossi46

    1.5 silicon finish

    I prefer it with water in. Spreads much nicer. Depends on weather though. I put very little in in winter
  17. Rossi46

    1.5 silicon finish

    Also a little spray bottle to keep your joins wet. Get two men though. Save all the hassle.
  18. Rossi46

    1.5 silicon finish

    It’s definitely better off with two men but if you’re stuck. Prime it twice and I use the max amount of water recommended. Both will give you more time. The time you get varies on too many things. Just go like your life depends on it.
  19. Rossi46

    Compressor and Gun for Tyrolean

    I just got a cheap metabo compressor that does the job. Noisy though cause it’s filling up a lot
  20. Rossi46

    1.5 silicon finish

    Prime it again if you want extra time
  21. Rossi46

    Ritmo water flow

    Is the water inlet on the mixing chamber a bit clogged up? Can’t keep up with the necessary flow when it gets going.
  22. Rossi46

    Compressor and Gun for Tyrolean

    Expensive though aren’t they?
  23. Rossi46

    PFT Ritmo L for sale

    Could you not use your ritmo for pumping fish food out to your pond in an efficient and fast way? Use for the generator too. Or even ground bait
  24. Rossi46

    Window tape

    Parcel
  25. Rossi46

    Window tape

    A Damn fine idea.
  26. Rossi46

    PFT Ritmo L for sale

    Sounds like all the wear parts are sorted. The motor will run forever.
  27. Rossi46

    PFT Ritmo L for sale

    C’mon @BigBish its a good buy that for sure
  28. Rossi46

    PFT Ritmo L for sale

    Only a clamp B4-2l. Had K1 Silicone through that fine too
  29. Rossi46

    PFT Ritmo L for sale

    I put a new clampy r&s on mine last weekend and it’s been perfect even when the gun was down for 5 -10 mins. No water fluctuation at all.
  30. Rossi46

    PFT Ritmo L for sale

    @Vincey uses one a lot and has no complaints
  31. Rossi46

    PFT Ritmo L for sale

    Get it bought and get back on the orange side :numberone:
  32. Rossi46

    Bargain!

    Stay away then. Could end up in a mess there. Looks like he’s just cobbling a load of random machine bits together
  33. Rossi46

    Bargain!

  34. Rossi46

    Bargain!

    They’ve struggled with the hopper for sure
  35. Rossi46

    Bargain!

    You’ve never used one then
  36. Rossi46

    Bargain!

    Used once Ritmo M. Get it before it goes. https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F153528670177
  37. Rossi46

    I dont care what weather man says .......

    Agree! @Danny I honestly still haven’t had chance to use them. Unreal! I used to have to deal with them constantly and you sent that box and not had any since. So really they’ve worked perfectly :ROFLMAO:
  38. Rossi46

    Power float

    I’ve got a set of scratch pads for mine but too many have said not to bother. I can see why, it would rip the wall to shreds. Good if mono has over set though I’d imagine.
  39. Rossi46

    Power float

    I think they’re best for when you I bar the wall. To I bar it the mortar has gone quite a bit more than you would normally let it go so the power sponge is ideal then.
  40. Rossi46

    Per metre

    And nasty at the same time
  41. Rossi46

    Compressor and hopper

    Honestly I can’t remember I’d have to check the compressor
  42. Rossi46

    House been rendered in Weber - advice wanted

    It’s not as big a fix as the original job. Try not to stress. In the grand scheme of things it’s a wall. Get as much as you can back from whoever did it. Find someone recommended that can do a thin coat job. A polymer base coat to flatten it out and a silicone/acrylic finish in any RAL/NCS...
  43. Rossi46

    Compressor and hopper

    Right, well b*ll***s to my answer. Can I delete my answer please @Danny
  44. Rossi46

    House been rendered in Weber - advice wanted

    Kitchens, a diesel and a ritmo. That’s not normal :ROFLMAO:
  45. Rossi46

    House been rendered in Weber - advice wanted

    Absolutely! Can’t do internal all the time it drives me potty. In the middle of a big detached at the moment and rain has f**k*d me over big time. Can’t beat external when the weather is right.
  46. Rossi46

    House been rendered in Weber - advice wanted

    Me too. I’m a part timer really
  47. Rossi46

    Compressor and hopper

    There’s loads on eBay. Anything from £15 to £100. Same make too. I rate them as an easy way to do bucket coat. Easy on off trigger, different nozzles, not too heavy, nice lightweight airline.
  48. Rossi46

    Silicone Top Coat Help

    Good to see you back @vfr12
  49. Rossi46

    Weber One Coat Render - Advice Wanted

    I disagree. It’ll get known that’s it’s a 1 chance render and the fix is a big cost. Get it right or pay twice. That’ll learn em.
Top