Search results

Bobby why dont you try hiring a diesel for a month. If at the end of the month you think it covered its hire costs then u should know its suitable for you.

ooo you bitch. a wins a win

Wales PFT Wales Wales

Tidy, gerrit on the wall mrs reily. It will be like the Ritmo ewi then ? can the EZE texturing gun be used on the normal 25 mm rondo

Not an easy thing to sell TBH , if you stuck the PFT built in compressor and put a b Pump on it instead it would sell easily. I would sell the Powercoat stuff separately. is it an older machine

is that with built in compressor Ryan

its an old kronk nobody cares

All by hand K rend GP base coat on brick Hp12 over rend and Topping with Marmorit noblo.

Keith Excactly. unless its going on thicker i.e. HP12 over roughcast or pebble dash then you save on mixing and application.

i dont spray all my thincoat basecoats , do a bit by hand aswell. sometimes when i weigh up getting a machine on a job versus the masking and cleaning up i decide to go in and hand apply. I'm talking about smaller jobs with easy access or if masking outweighs time spent laying on. depends on...

nobody ever asks for a conveying pump.I ask a potential customer some questions and tell them the machine best suited. You're a plasterer working every day with years and years of experience. You do private jobs all ranging from mono to smooth renders and texture coats. Is the Ritmo or Swing...

if its simple you need stay as you are. Machine plastering is an opportunity to decrease costs and increase profits. A conveying pump wont earn you money doing hardwall.

And a plasterer

Is it road legal

I'll give you 2k for your honda. You may aswell buy a ritmo here whilst dropping it off

im kool as elsie. look like sting

Wouldn't wann Wat did u look at. Just a simple thing I'm looking at . I got a shitttty little moped I use for nipping round and it's freezing if u don't wrap up. Reliable as ever. Starts on the button. Suzuki I think. It's not cool though. I wouldn't mind a labretta jnstead

If u hear of any available I may be interested if it's in my price range

reccomend me a good quad danny. i need it to tow stuff round the yard and now thinking of towing a small trailer with my kayak across a beach a few miles to get to the SPOT. Road legal now a requirement. so far thinking of honda 4x4 big red. dont want a flashy thing just a reliable horse

me an cars are done. still like them but wont waste money on a racing car anymore. i fancy a new truck for work. Vw crafter dropside. automatic with a tail lift and 1.5 ton hiab. very very handy

is that a code for what you get up to

I used to have to do this with a turbosol Mini. i would pour sand and cement into it and if i stopped i had to keep it moving. Trouble was it just used to draw from middle and the stuff round edges would stay there. It took ages to clean

oohh you bitch!! I be up for a deal Danny but it has to be more flexible. I'm sure you can work something out that suits you

The Original PFT D6-3 twister rotor and stator is more like £ 75 .00 And it is the best on the market by about 30% . To be clear on this This is not an opinion of any dealer or end user this is a fact based on 1000's of hours of testing. PFT are the main supplier of plastering machines to...

never noticed tbh Ive done loads of hardwall with g4,g5 Ritmo and just wash it same. Put sponge balls through twice and wash the gun . 5 mins wrap the pipes up 5 mins swap mixing shaft for cleaning tool , wash the hauling bracket and turn it on to let the cleaning tool do its job 5 mins ...

surely it takes the same time to clean out as anything. same procedure innit

both

maybe its not for spraying then

wat compressor

yes run a dry roller down to even out the paint

just give it a go. noblo goes through well enough

i got a titan 440 aswell. leave it inside you can put 30 mts of hose on it.

I use the Graco cleanshot gun which gives minimum overspray and i use a paint shield on the corners. I always spray then back roller Plus anything at risk i drop a nice clean dustsheet over. I did a front of a church once and because of the chance of overspray i just hand rolled it on. I...

any thin coat system requires priming then topcoat. Using noblo or similar just means you do the topcoat first then paint it. You can have the same colour noblo as paint so only one coat needed. I do use airless to spray the paint but to be honest a good painter will do a better job than me so...

thin coat over rend with a mineral finish like Marmorit noblo if its private. scratch render or sponge finish if its a new build

It wont dry in time to sand nick.

its a bit more bulky than a jet but u wont spray bucket coats with the on board compressor. No water pump on the Switchable XL. Only the switchable and the single phase have a speed control. you can only adjust the speed in single phase mode. I have a switchable g4 and find it runs best if...

Its inevitable that after a year or 2 of regular use mixing the gear and pouring it into a machine you will start to wish the machine mixed as-well. Are you gonna then decide that you need a second machine twice the size and a generator to do the same private jobs you like doing ? Would it...

Fuuukin ell Danny do you really think in the 100's years they havent thought about catching and recycling the chips we use Trays, offcuts of carpet, old sacks whatever

Get those big stars by my name please

The LB version will have a helium filter attachment and you can fill a 8 ft balloon and walk it across ground where poor access is the problem

refina do similar.. what they got there is someone pouring, then someone behind with a spat set at 5mm dept (estimate) then someone with a spat smoothing off.. the key is mixing the drum full in time to keep up with the demand.

Its gonna have 2 outlets so you can run 2 gangs of 1 machine

It's all mine

An Ritmo XL with extension hopper can be placed under a liquid screed wagon and used to pump it into place. You would need to swap the Rotor and stator for a large output version. It would not be as fast as a diesel pump designed for the job but it can be then used to mix and spray pre bagged or...

hey Bobs give us your first bit of helpful info regaring your experience. What were the setting you used on the Ritmo L for CPI GPM i.e. speed,water,bar pressure

i must have walked about 10 miles whilst talking on the phone :RpS_laugh:

More than 5 ton if you're running 15 bar

That's absolute rubbish. The Ritmo will mix and pump K rend all day along with any other bagged product. Does that look like its struggling.

Thieving scouse bratts