Hi all probably been asked on here ? Thinking of getting one of these power floats couple of questions are they any good on sand and cement bit of lime ? Are they worth the investment? Go steady thanks .
Hi all haven’t used a stand for years fancy a change anyone know of getting a descent stand from? Brought one from toolstation looked good in the book but luckily it was damaged. Thanks
hi all has anyone used this before ? Got a small job and I'm after as much info on it as possible i.e. Do I need a primer? How to apply and finish it's only 5 bags but need to be done right .many thanks nick
hi all fellow spreaders has anyone got or used the Refina plaziflex spat ?are they any good ?just ordered one just curious many thanks all the best to all forum members for 2017 ! Kind regards nick aka Bagrat
hi just a couple of questions if any more experienced members can tell me please I've use ocr over rendaid fine but been price to much for rendaid so am thinking of trying hp12 then ocr on top ? It's only a small job I trying hp12 because of it availability. Thanks in advance
I've got a variety of tape tech gear some hardly used a pump automatic taper boxes nail spotter etc if anyone can pm then I will forward all pictures.many thanks a bargain for a taper flex sander also thrown in pick up only from Liverpool
hi all can any tell if I can purchase a speedskim in Liverpool any stockists ?need one for Tuesday did have one but sold it ha but thinking of giving them another go !also I have several NELA trowels for sale if anyone is interested? Thanks
after using nela s*p*r*lex trowel since they came out recently I've noticed on the butt end of boards they show lines where the boards join onto the other boards .my method of using the trowel is 2 cross trowels at the end of the gauge but I do lay on only 2 mil !my question is is it because I'm...
hi there all can anyone tell me if it is possible to skim the same day ?have used it about 10 years ago can't remember if I let it dry 24 hours ?also who stock it ?bq done it not to sure many thanks Nick
Hi all was after a few ideas on storing trowels in the back of the van .lve been hanging them up in my old van but would ideally Ike to lay them flat on the floor maybe a compartment or box many thanks for any ideas.
Hi all looking to sell my van Renault trafic 06 76000 on the clock its a quick sale sold as seen the bad points few dents oil leek seat belt playing up top seal missing windscreen side door drops all the time rip in drivers seat obviously not clean! the good points in my opinion if some one was...
Hi all great forum well the only forum has any one ever used this lime top coat finish plaster before? Ive got to over the base coat which has now cured thanks in advance kind regards nick
The ancient chinese have beat all your stress cracks problems apparently they used sticky rice in the mortar !on the great wall would you believe forget ebay for cheap rolls of mesh !im looking for a rice suppliers !
Afternoon all being a recently converted eze spat owner love it more than my missus lol! I always finish with plazzy after 2 or 3 spats has any of you guys used the spat in conjunction with finishing with a s*p*r*lex nela ofcourse any advice appreciated many thanks
Hi all ive got a small garden wall to do in a krend the wall is only small concrete block but top block is celcon.iam a bit concerned of suction iam doing it two passes no mesh its only a days work for me .will it be slightly colour different?or crack ?thanks lads
1 my mrs cant do it. 2 my next door neighbour cant do it .3 you can always pull the wool over people who havent a clue just like mechanics! 4 love the nice little earners . 5 trowels and handtools are cheaper than joiners ! 6 we annoy other trades with our mess .7 the plasterers forum .8 we...
went for a days course today lads learnt thincoat system on boards very impressed with it .worth a visit lads if your a novice like myself tutor colin very good.
lve never been one for all health and safety i mean where was it 20 years ago! a fellow spread fell over his own floor scraper whilst talking to us and fell right on his trowel.whan he hit the floor the trowel went through his non spreading handand he spent 2 nights in hospital and lost the job...
for sale bazooka flat boxes pump x2 flex sander not to sure if its working correctly various other bits and bobs pump gooseneck corner finisher few poles not the 40 or 50 day type ha! f interested pm please regards bagrat
aright lads havent been on site for a while no l havent been stuck down well maybe for my plastering ! work myself in liverpool mainly just for builders and sparks dont get me started on sparks! love the job most of the time cheers nick bagrat .
Hi lads a lad who works with had to render some small areas in krend .he informed me tonight one section he scratched it the top coat ft.Iam worried what the colour will turn out as the rest of it had hp12 on it he just couldn't be bothered to mix up a bit of base.is there anyway round this...
Hi lads been on a job for weeks now big extension etc.been getting put in a corner by builder for a price.my question is if it takes 4 weeks with 2 plasterers how long would it take a one and one gang bear it mind the labourer will be getting exactly half as much as myself.my argument is it...
Hi chaps can anyone tell me please what the spec on a bay window ply ?the job is basecoat then topcoat mono.do I use the big roll of fibre tape over ply instead of elm? Many thanks time to be sensible nick.
hi lads just had renewal through .the monthly payments fully comp gone up from45 to 75 !!if anyone knows of any decent brokers I would be very grateful.many thanks bagrat
Can anyone please advise me please? Got a front bay round to do in mono scratch.I've got a isection 1.2m but the bay is maybe 2m any ideas what to use as I don't think you can get a isection bigger than 1.2 m . I've got some primary channel but am not sure if would be good To open up? Many thanks
Can anyone advise please?am going existing render with hp12 and then topcoat .should I pva or straight over with hp .the existing is solid many thanks.
Just been to brand new tesco in park road Liverpool .the finish I presume is taped is dreadful .going up the escalator the external angles are all over the show.they must of been cscs registered to get on site so they must know what there doing?I mean for brand new work for a company as big as...
My fellow spread looked at the job on monday morning.we turn up this morning knocking on the door 10 mins no answer .then he phones the builder up it's only the house down the road 5doors down .the house with the massive pillars outside embarrassing or what.when we got he says let's get the dust...
hi lads never sponged before been reading a few threads on it and am prepared to give it a whirl.can anyone tell me the script ie when using the sponge is it circular motion etc .many thanks some people say I was born to sponge being a scouse!lol.
Fuming just done a 14 hour day .all I get of my better half poxy shepards pie .am livid I mean how hours do yo have to do for a decent meal !am calling a meeting.
Anyone seen the trowels on eBay they seem a bargin ?iam tempted to put a bid in but something is telling me not to!there's 5marshalltown different sizes currently74 pound .what do you think?the seller has no history?
Hi lads got a gable end to do with chimney on it.I was just wondering would anyone use lime in topcoat render?also would it be stopbeads all the way or angle beads it's a monster gable and I'm thinking with angles they bend like bananas when planted on top of each other.thanks bagrat!
Can anyone remember the great drought on plaster.I think it was2002 might be wrong .what a joke it was being on price was a mare.we were on a new build site working for Elvis presley builders .every cheque was return to sender .the groundworker put the bucket of his digger on top of the roof...
Been asked to render front of house. I would like to do it mono render but I've never done a semi circle front bay in the mono.I've dashed a bay similar in the past so i know the bead has to be in a circle any tips thanks bagrat.
I've used hp basecoat going to use standard com rend for top.will top coat drag or will I be able to use a spat to achieve a flat finish before I scrape thanks lads.
The worst bodge I have seen.I wasworking on a swimming pool and the lad doin the tiling wanted to use bathroom and shower sealant for the internals. Needless to say he was a pole.it made me laugh for weeks the sealant was from b&q priceless.
Can't believe what happened on the job today.two blokes turn up chainsaw a medium sized tree down .it took no more than a hour woman gave150 they wanted300.myself and some other spread were there 4 hours made a tenner more plus we supplied3bags for the ceiling.I'm thinking of buying a chainsaw...
I've often wanted a job on someone house who is famous.but all I seem to get rip of back doctors rich people who moan about the prices.worst of all love jobs.ive had a few local celebs in Liverpool well 1 actually out of all the jobs over the years. Just give me cillas no eh lol
Can anyone tell me what's the quickest and cheapest way to stick boards.the blockwork is glossed and some areas are not.I don't think client wants to use thistle bond it.any ideas on a alternative thanks lads.
Am sure we've all had back problems.went to back clinic last night cheeky so and so charged me 90 pound for half an hour.she said would I work for 80 a day so I said no way.so I gave her 30 quid now I've got a ceiling to do for her for a poxy 60 and me back is worse.where's the justice eh wrong...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.