Search results

Cheers pal any pics? What did you do with the edges just tickle them?

Has anyone had success in patching mono and then painting the entire elevation and not being able to see the patch at all. Just curious if the edging of the patch is visible? Any pics if so cheers

Thinking of eze 24 with 6mm nozzle?

Alpine were going with

What does this looks like travertine floated or mono floated. Got to match to this shite

Anyone know of an ocr that doesn't micro crack but is a small grain size. Ms20 is the best but is very course and doesn't leave a smooth finish. I've tried weber and ecorend but always micro cracks

What thickness and was it a slower setter?

Has anyone had any experience with lc7 or s605 as a troweled finish? What's the process and is it a slow setter?

I was thinking of cutting a piece of cardboard the shape of the patch and build it up that way then once it's built up gently spray the edge?

Anyone have any tips on patching thin coat spraying? If you tape it off won't it leave a line and if you spray the patch won't the surrounding area build up more then the rest. Just seeing if anyone has any ways? Tia

Thing I with that finish all customers hate it looking to heavy they prefer hand float as it looks more modern

Cheers mate that's a massive help. Should give me 10 mins to catch up

How do you mean water sprayer. Spray the joins?

Here is the wall. Customer doesn't want the textured look. Can I not get the lad to spray in sections and wait for me to catch up. Surely it's the same as hard applying as you still have to leave a join open to go down to the next flank?

Any lads spray thin coat and float? We are looking at spraying and floating just worries how long the scaff joins can be left open while we finish the flank? 10 mins or half hour?

Hi Thanks for the detailed information. We are looking at spraying and then finish with a float with a ritmo. How long can you leave an open join on a scaffold for. That's what we are worried about Thanks

Has anyone ever put thin coat over mono no tight pass?

I mean the white render behind. Been told to use ivory krend but would prefer to use exactly what it is

Anyone know what sand and cement this is Tia

Bought the turbo to spray mono faster. Didnt know it wouldnt spray thin coat

Pft dealer told me even if the turbo is on 0 it's far to fast for thin coat

What's the A3-2L. Can my turbo be changed to this? Is there anyway of spraying the full amount of thin coat I buy or will I have to stop and clean out the gear with the ball?

I've got a turbo but getting in converted back to b4-2. Is it comfortable with the L? Also cant get my head round having to fill all the pipes up with gear does that mean it will take a tub just to use it and then washing down at the end?

Would you say the hopper and compressor is the same finish

I've had a price for £1200 for the set up but people said it's to fast for thin coat. In happy to pay 1200 if its nice to use

Cheers. I've got a hopper gun but everyone on the the talk group says the finish is miles better with a gun I'm looking at getting the setup for my ritmo but sounds like a right faff to set it up

Cheers. 200ml per tub I normally use. I'll message stu now

Anyone know where I can get a bennu spray gum Tia

Thanks mate much appreciated

Cheers for the helpful advice pal.

I'm tanking a retaining wall and wondering if the salt neutraliser should be on the brickwork, after the tanking or in the scratch coat. Thanks

Building control passed it with parex spec happy days

Are these ok. Be a night mate getting them other ones in

Thanks mate sounds like I'm knackered then. Going to be a nightmare putting new ones in

I knocked them off as builder set them around 10mm. Let's see what building control say

Anyone been in a similar situation to this? I've knocked off weep holes on an extension as in parex spec it says they are not needed in monocouche system due to breathability. Builder going mad saying building control will not pass this off. So the customer has taken the spec to building control...

Lovely gear but air pocket city

Can you set it to minimum rigsby say if I only wanted to add a little if its fassa overnight. I only do next days but fassa hangs for ages

Have any lads always used accelerator in the barrels for a long time and not had problems. Were doing over nights with fassa but soaking the next day so want to accelerate it? How is everyone flushing there machines out? Not sure if i should get the doser

Cheers rigsby have you used wintamix with mono and no colour issues? This has helped me loads

I want to book work for December and dont want to go back on the skimming. Boring

planning jobs ahead. Weather will change before you know it

What does everyone do when temps are freezing. Does anyone put frost proofer in for overnights. Wickes?

Anyone know the setting for wickes accelerator and the doser or know if it needs diluted first?

Really? Do you want to buy it?

True mate, I just hate the long days with same day makes the day really heavy. I prefer next days but dont want to be scratching concrete. I've got some wickes accelerator I'll bang that in. How many litres to a drum does anyone know? I've got 4 days spraying

Next week 15c will I get away with next day scrapes with parex or stick to same days. Over mongris 12mm? Cheers

I've got the belle cleaner. So spray all over then jet wash

Anyone got any tips on cleaning the grill on the ritmo l dont fancy going round with a wire brush. I was thinking of soaking it in a barrel and then jetwash off. I've seen people cleaning ritmo and it looks mint

Cheers for that rigsby. I watched a video by danny von Dutch and he washes the machine out backwards with fairy and hasn't ever had any issues. I had a similar issue using waterproofer. I ended up with the solenoid sticking causing wet spray when starting up again. I looked at the doser but £400...