advice please

[S a plastering]

hi going to do some acrylic for the first time soon so go easy on me rendering a wrap round
the guy wanted mono but hate doing it ive swerved him for a acrlic instead cos i personly think it looks better an far easier to apply anyway been on the web and seen jub 1.5 has anyone used this im in mcr so any leads as to where we can get some around the north west

also will it need the primer first thanks

 

[Render Systems]

hi done loads of thincoat, get it from here Direct Building Products they deliver free if over 100 quid get the unigrund primer also if a dark colour going on... only thing to really remember is put it on as tight as you can... then scrape as much off again as you can... then just go over with plastic float in circular motions...
oh ask for Chris Ross 01274720905 hope tghis helps

 

[S a plastering]

cheers pal very helpfull

 

[S a plastering]

will i need any sort of primer firsti will be going over weber ocr thanks

 

[Render Systems]

i would give it a coat of microgobetis or unigrund as the mono will suck it in and may cause joints as drying to fast

 

[Rigsby]

You need a matching primer. eg, Jub bucket coat so Jub primer. You will need to order the same colour. Jub is quite watery and goes far but sand and cement sucks it in. Nice stuff Jub.