Back To Basics Rendering

[spread1990]

Alright Fellas

Going back to basics here:

what mix ratio works best for your for external rendering and internal rendering?

Any hints or tips for rendering and pebble-dashing would be much appreciated!.

Cheers
Reece :RpS_thumbsup:

 

[gsydonkey]

Alright Reece

would depend on background but new block i always tend to go
All type b rendering sand don't know what you call it in england but its pink and slightly more coarse then plastering sand.

Scratch i just use standard mix Bucket Gauged 4:1 with plaz we use 7ml of concentrate straight in the mixer.

float is 4 1/2 : 1 1 cup of evo-plaz mixed in the water & half shovel of lime

thats what works for me

Craig

 

[S a plastering]

What tool do you use for them fluted angles are they easy enough to do nice work by the way

 

[CTPlastering]

My dad made a template last year for them madmonk , had a few windows to do . I wasnt on the job but al ask him . Looksd spot on when finished like

 

[gsydonkey]

2 men a rule & a small tool and a steady hand pinch the small tool and use your hand as a guide up the rule found those quoin cutters the other day i reckon they could work well. there not easiest thing to do

 

[gsydonkey]

2 men a rule & a small tool and a steady hand pinch the small tool and use your hand as a guide up the rule found those quoin cutters the other day i reckon they could work well. there not easiest thing to do Thanks for the comments :RpS_thumbsup:

 

[masterplazterer]

Nice work lad.

 

[gsydonkey]

cheers :RpS_thumbup:

 

[kgreigh]

Nice:RpS_thumbup:

 

[Olican]

Alright Reece

would depend on background but new block i always tend to go
All type b rendering sand don't know what you call it in england but its pink and slightly more coarse then plastering sand.

Scratch i just use standard mix Bucket Gauged 4:1 with plaz we use 7ml of concentrate straight in the mixer.

float is 4 1/2 : 1 1 cup of evo-plaz mixed in the water & half shovel of lime

thats what works for me mmView attachment 4028View attachment 4029View attachment 4030

Craig

Quality work there :RpS_thumbsup:

 

[theclemo]

Back to basics... This is what i had to sort out to day..

 

[beddy]

What does that say? Do not...

 

[Olican]

Do not rule??:RpS_confused:

 

[theclemo]

Lol do not remove got it free off gypsum.

 

[theclemo]

It must be hard to build straight

 

[KevRM]

if you hit the rule with a lump hammer about half way up it might contour to the wall. problem solved :RpS_thumbsup:

 

[theclemo]

if you hit the rule with a lump hammer about half way up it might contour to the wall. problem solved :RpS_thumbsup:

thanks that worked :RpS_thumbsup:

 

[Danny]

I think kev was joking



Looks good

 

[bubbles65]

What does that say? Do not...

Think it used to say "Do not rub this writing off"

 

[theclemo]

Think it used to say "Do not rub this writing off"

Or do not rob