Changing blade

Status
Not open for further replies.
A

ankers

Active Member
Anyone know how to change the blade to a standard blade on an eze spat cant see any screws but plasterers one stop shop sell replacement blades?
 
Got the super flex in at mo but want the standard blade. Are they easy to pull out and can they be put back in
 
ankers said:
Got the super flex in at mo but want the standard blade. Are they easy to pull out and can they be put back in
Click to expand...
Very easy mate, if bedded in with gunk use some grips to pull the old one out. Clean out any bitsof old plaster etc in the groove and i put neat washing up liquid on theback of replacement blade and wearing gloves (too slippy otherwise) and slide new blade in moving it from side to side as you go till your happy its in position :birra:
 
Marshy said:
Very easy mate, if bedded in with gunk use some grips to pull the old one out. Clean out any bitsof old plaster etc in the groove and i put neat washing up liquid on theback of replacement blade and wearing gloves (too slippy otherwise) and slide new blade in moving it from side to side as you go till your happy its in position :birra:
Click to expand...
I only want to swap it for a day then put s*p*r*lex back in is itpossible
 
ankers said:
I only want to swap it for a day then put s*p*r*lex back in is itpossible
Click to expand...
No not really if it's welded in ?? Depends how clean you keep your stuff?? All my gear is spotless so I'd be able to swap blades no bother plus put them back in. Try spraying some WD 40 or similar to work it loose and just wear gloves and gently moving blade side to side wiggle it out and that should be ok mate
 
Status
Not open for further replies.

Share this page

Back
Top