cordless sds drills

  • Thread starter Thread starter berbie38
  • Start date Start date
Status
Not open for further replies.
B

berbie38

Guest
hi guys been on a job today trying to put a frame up for a minute ceiling, but my bosch hammer drill didnt have the guts to go through a lintol. so ive hired a 24 v cordless hitatchi sds drill with a good drill bit, it looks very impressive do u think it will do the biz? always thought mains powered would be better
 
what make/model is the drill? should be fine really, the quality of cordless tools is very impressive and quality cordless tools will wipe the floor with most corded tools, drillwise you'll have no problems  8-)

ah just noticed you said hitachi... if its the one im thinking of you should be fine 8-)
 
what make/model is the drill? should be fine really, the quality of cordless tools is very impressive and quality cordless tools will wipe the floor with most corded tools, drillwise you'll have no problems  8-)
Click to expand...
its a hitachi dh 24dva cordless rotary hammer with makita drill bits 8mm
 
aye thats the one, should have any probs with that i shouldnt think :-/ what depth are you cutting to?
 
aye thats the one, should have any probs with that i shouldnt think  :-/ what depth are you cutting to?
Click to expand...
8mm diameter 95 mm depth for hammer fixings, looks a beast of a machine!
 
should go through like a hot knife through butter :P

tho if it doesnt dont blame me ;D
 
hi guys been on a job today trying to put a frame up for a minute ceiling, but my bosch hammer drill didnt have the guts to go through a lintol. so ive hired a 24 v cordless hitatchi sds drill with a good drill bit, it looks very impressive do u think it will do the biz? always thought mains powered would be better
Click to expand...
Are you putting MF Frame up if so you might want to invest in a Pulsa gun if you do them regular, I have one i use for MF, and even meshing steel things like that great tools
 
hi guys been on a job today trying to put a frame up for a minute ceiling, but my bosch hammer drill didnt have the guts to go through a lintol. so ive hired a 24 v cordless hitatchi sds drill with a good drill bit, it looks very impressive do u think it will do the biz? always thought mains powered would be better
Click to expand...
Are you putting MF Frame up if so you might want to invest in a Pulsa gun if you do them regular, I have one i use for MF, and even meshing steel things like that great tools
Click to expand...
no just wood frame. what is pulsa gun sounds interesting?
 
used it today, no messing! like a knife through butter! :o
Click to expand...


good stuff, mind if i ask how much it cost to hire both drill and drill bit? and how long roughly it took to cut through?
 
used it today, no messing! like a knife through butter! :o
Click to expand...


good stuff, mind if i ask how much it cost to hire both drill and drill bit? and how long roughly it took to cut through?
Click to expand...
cost me a tenner plus vat to hire. plus had to buy my own bit . each hole took about 10 seconds
 
Status
Not open for further replies.

Share this page

Back
Top