Dot and dab question

[ste25]

Hi
I have removed some plaster from a block wall which has left plaster ingrained in the rough blockwork I've gone over it with a wire brush but ain't touching it I won't to dot and dab the wall just need to know if I have to remove what's left of the plaster before I do this and if so best way to do this thanks

 

[Mouldyoldspudgun]

Hi
I have removed some plaster from a block wall which has left plaster ingrained in the rough blockwork I've gone over it with a wire brush but ain't touching it I won't to dot and dab the wall just need to know if I have to remove what's left of the plaster before I do this and if so best way to do this thanks

Just kill the dust and dot and dab away

 

[TonyM]

Brush off dust and blue grit it. When dry, dab away.


Sent from my iPhone using Tapatalk

 

[Deleted member 29624]

Blue grit? As above kill dust and dab.

 

[zombie]

Tut tut lodan son!

You still have a lot to learn!

Just dot & dab at worse just dapen down with a bit of water but I wouldn't!

Block work is designefed to take adhesive without needing anything on it!

 

[Deleted member 29624]

Tut tut lodan son!

You still have a lot to learn!

Just dot & dab at worse just dapen down with a bit of water but I wouldn't!

Block work is designefed to take adhesive without needing anything on it!

I was referring to the chap above me who mentioned grit, I would kill dust, dampen and dab away

 

[Deleted member 29624]

@zombie when you re read it

 

[zombie]

I was referring to the chap above me who mentioned grit, I would kill dust, dampen and dab away

Gulp my bad! Sorry x

 

[Deleted member 29624]

Gulp my bad! Sorry x

 

[zombie]

Phhhhh F*****g courser! X

 

[Deleted member 29624]

Phhhhh F*****g courser! X

 

[flynnyman]

What's on the opposite side and why did it fail in the first place?