Drywall adhesive

[windy]

Any tips for getting drywall adhesive to set faster?

 

[johniosaif]

Any tips for getting drywall adhesive to set faster?

Cement, works for most plaster products, warm water also

 

[jamesthefirst]

Start earlier!:RpS_cool:

 

[windy]

Like it James :RpS_thumbsup:

 

[Ashleyscoob]

Dirty water ,

 

[casplas]

all of the above work ,you cant regulate it, so it go's to quick or no diff at all.

 

[semilong]

Apply stiffer and you can skim boards immediatly, if thats why you ask., or
support head reveals with off cut plasterboard from sills,allows you fit head section...

 

[carlos]

Cement. A bucket trowel per half bag of addy should set rock hard in 30 min or so.

 

[CTPlastering]

Will it nak the strength up at all ? Could sound like a daft question ......... I could just imagin it shrinkin and coming off etc

 

[barryed]

**** in it

 

[carlos]

Will it nak the strength up at all ? Could sound like a daft question ......... I could just imagin it shrinkin and coming off etc

Pass mate. I have done this loads to fill small patches on lath walls and ceilings. Sticks like **** to a blanket and you can skim in around 45 min.

Never had a problem. Although never dabbed boards up with it.

 

[Bagrat]

Just leave the bag open in the back of the van !

 

[Nisus]

Try this stuff:

:RpS_thumbup:
Fast set drywall adhesive - YouTube

 

[jamesthefirst]

Cement. A bucket trowel per half bag of addy should set rock hard in 30 min or so.

Ooh! Ill try rubbing some on me willy tonight then.

 

[beddy]

Don't get it down your Jap eye jimbo

 

[Rhys]

Piss in it :RpS_thumbup:

 

[Sargon]

LOL, you lot are off your heads.

I've heard warm water too. Not sure if cement would mess with it.

I'm sure I've seen an Australian guy add table salt to plaster before - Wouldn't recommend that though!

 

[stuart23]

One of the guys who work for me told me throw a few hand fulls of bonding into sand and cement and it will set fast, and it did! Same guy says Throw a few handfuls of cement and bonding into anything and it will set just as fast. Not tried it myself but feel free.

 

[beddy]

A mate of mine used to mix 50/50 bonding and dab and it didn't set fast. Add handful of cement and iitsa it's a different story

 

[Nisus]

Any tips for getting drywall adhesive to set faster?

Just add a few handfuls of 2CaSO4·H2O :RpS_cool:

 

[Fatarm]

Another top tip from the forum !!! ..... love it ..:RpS_thumbup:
cheers. nisus :RpS_thumbup:

 

[raggles]

Just buy a couple of out of date bags of it off ebay :RpS_thumbup: mind you you'll be lucky to get it out of the bucket :RpS_crying:

 

[johniosaif]

Is it set yet?