How it used to be

[bubbles65]

@beddy @cassie
https://s1042.photobucket.com/user/bigal4444/media/2014-12-20124357_zpsc2436bab.jpg.html

https://s1042.photobucket.com/user/bigal4444/media/2014-12-20124401_zps5ef8f48a.jpg.html

Believe me, this would have been considered overkill when I first started, tied horizontally on every lift AND with handrails!!!!!

 

[beddy]

Why am I tagged al?

 

[bubbles65]

Cos you asked about 'pin and pole' scaffolding a while back.............. and I fancy you :RpS_wub:

 

[johniosaif]

Are you sure it was scaffolding he was talking about "been pinned and poled"

 

[Fatarm]

Pin an pole.....:RpS_thumbup:....some of the best scaffs I worked on Al:RpS_thumbup:

 

[bubbles65]

Aye, at least you could get at the wall!

 

[bubbles65]

Bucketful of compo out of the first batch, set aside for filling in the pinholes :RpS_thumbup:

 

[Fatarm]

Drop it as you come down:RpS_thumbup:
old boy I used to work with "back in the day":rolleyes)..insisted on him cuttin out the dook holes,?...h and s conscious:RpS_thumbup:....
Hse would have a field day now:rolleyes)

 

[bubbles65]

I always put my own up, wouldn't trust a lab with my life :RpS_crying:
Used some pile of chocks to keep it steady though :RpS_thumbsup:

 

[Arti]

so you have to **** about filling in the holes..................:-0

did they not show through the top coat when its dry?

 

[Fatarm]

Nope...as al says keep some of your first gear by:RpS_thumbup:

 

[beddy]

Cos you asked about 'pin and pole' scaffolding a while back.............. and I fancy you :RpS_wub:

Did I?!?!

 

[bubbles65]

Did I?!?!

Post number 34 :RpS_thumbup:

https://www.plasterersforum.com/gen...23-old-school-scaffold.html?highlight=pudlock

 

[beddy]

F*****g two years ago lol no wonder I didn't remember

 

[bubbles65]

Thought I had a shoit memory :-0

 

[Dansouthcoast84]

Why would you use pin scaff when rendering? Dont make sense to me.
struggle all the time.to.drum into scaffs heads to leave off wall enough.

And you wanna put them in the bloody wall!!!

 

[lucius]

Last time I was on that stuff the fork lift caught it and pulled the puddys out of the wall and collapsed the lot one of the lads was that badly hurt he never worked again.

 

[user__removed]

That could happen anyway. Forklift drivers need to stop toking.

 

[lucius]

Probably wouldn't happen on an independent but the puddys are only in the bwk a couple of inches pull them out and it all goes.