How much water

[gooner59]

do you guys put in your weber ocr ,? it says between 4-5 ltrs ,i'am also going to mix it in a Bell about two bags at a time ,i'am going to lay it on ,rule-it ,leave to tighten then rubb-up with ether a plastic float,or i have bought a cheap sponge float from wick's,i whent to start today and where the builders had scabbed the concrete on my recommendation ,they had left it very dusty ,so i requested that they power wash it and stipple with SBR/OPC/SAND mix for a better mechanical key.

 

[S a plastering]

4 litres is bang on mate just judge it you might be better with a whisk cos it does
Take a bit of mixing to break down the additives

 

[theblones]

hey Gooner, That OCR is a bit stickky in a bell .We got that Lotus XS continuous mixer available for hire down here in Swansea. U just drop a bag in and get a consistent mix. PM if your interested

 

[spunky]

Isn't OCR more for machine use?

 

[theblones]

nahh,slap it on the wall

 

[gooner59]

Will try the bell first Blones if its no good i will be on to you as the job in over the Gower ,and i went through Swansea this morning to get there , but tomoz i'am going exit 47 so as to miss the traffic lol

 

[theblones]

Where in the Gower, I bet you have to drive past the yard to get there

 

[nickelarse]

That spray finish looked a bit lumpy

 

[essexandy]

Isn't OCR more for machine use?

No you tosser, Weber say it's for hand application on their website. They don't even say that it's suitable for spraying.

 

[gooner59]

Where in the Gower, I bet you have to drive past the yard to get there

place called ilston m8, what area is your yard then ?

 

[theblones]

Go through the city of killay out toward airport. Just before you hit the cattle grid we by there.

Nik I reckon ur missing plastering

 

[nickelarse]

Oh I am blones. Just been in a really quiet place last few days. Can't say I ever want to see a trowel again. But machines still get me slightly aroused

 

[theblones]

ooohh Nick i can sense it. If someone offered you $25 a meter for a nice 300 m2 private new build over there in the US of A and they loaned you a machine, that Holiday would go on hold for a couple weeks.

 

[nickelarse]

Ha yeah your right it probably would!!

 

[Rigsby]

Will try the bell first Blones if its no good i will be on to you as the job in over the Gower ,and i went through Swansea this morning to get there , but tomoz i'am going exit 47 so as to miss the traffic lol

Turn it out of the mixer into a bath. It will stiffen up straight away so give it a whisk after a minute or two.

 

[gooner59]

we were ok it actually took about 5 ltrs per bag ,three bags per mix ,as four was just a bit to full for the mixer, mixed for about 20 mins ,i put a first coat on everything i was going to do for the day,then had Tea, then gave it all a second coat then ruled this then had dinner then rubbed it all -up while the labourer cleand -up then offski lol, go and do a bit more tomorrow !!!

 

[layiton]

No you tosser, Weber say it's for hand application on their website. They don't even say that it's suitable for spraying.

sprays fine thru a machine, rather that than handball.

 

[Ivor]

How much Does one of these machines coat blones bit like a joddy but better

 

[theblones]

1100 qid plus the dreded

 

[Ivor]

Good price that very impressed Iv been thinking Aboat getting a nother joddy as mine got pinched but I like the look of these I'm gona start putting some coins away and il be in touch mate