BigBish
Well-Known Member
First day with the ritmo l today. Sprayed perfectly and got the job done with out fault.
Im up on the scaffold, labourers cleaning machine.
I hear the machine make noises it shouldnt, look over and the hopper has come undone when he pumped the last of the material in to the skip.
He tilted the top back to push the dust down. Didnt do the nut up.
The mixing shaft got jammed out and down the side of the rotor head, dug in to the rubber mixing chamber and left me with two 10p size gouged out holes
The machine was stripped, cleaned ect and works and pumps water.
Is it f**k*d.
Im up on the scaffold, labourers cleaning machine.
I hear the machine make noises it shouldnt, look over and the hopper has come undone when he pumped the last of the material in to the skip.
He tilted the top back to push the dust down. Didnt do the nut up.
The mixing shaft got jammed out and down the side of the rotor head, dug in to the rubber mixing chamber and left me with two 10p size gouged out holes
The machine was stripped, cleaned ect and works and pumps water.
Is it f**k*d.