Is this k rend job any good?

[Shakey1234200]

Hi just had k rend done at the front of my property and the guy said he was a expert , wanted to see if it was any good?

 

[Dollar]

Hi just had k rend done at the front of my property and the guy said he was a expert , wanted to see if it was any good?

That’s going to need to come off….

 

[Monkey Boy]

Is them spotlights in you soffit?
turn them on at night when scaffold is dropped then post pics

 

[bobski]

Hi just had k rend done at the front of my property and the guy said he was a expert , wanted to see if it was any good?

Weird post

Has any thing raised your suspicion or doubt?

If not, weird post.

 

[Elite exteriors]

Hi just had k rend done at the front of my property and the guy said he was a expert , wanted to see if it was any good?

Do you work as a clown for a day job or suffer with learning difficulties or anything like that

 

[Shakey1234200]

Do you work as a clown for a day job or suffer with learning difficulties or anything like that

Why do you say that my friend?

 

[Stewie03]

Sounds like he’s looking for reasons not to pay or get it reduced

 

[Shakey1234200]

Sounds like he’s looking for reasons not to pay or get it reduced

Not at all it’s just a simple question to see what you guys think as I know nothing about it.

 

[Hhj]

Sounds like he’s looking for reasons not to pay or get it reduced

 

[bobski]

Sounds like he’s looking for reasons not to pay or get it reduced

Or it could be him/his work


Fishing for possible compliments.....

 

[Shakey1234200]

Or it could be him/his work


Fishing for possible compliments.....

You found me out bobski! Not bad for first attempt huh?

 

[FreeD]

Looks like a quality job. Black windows are a nightmare to keep clean. Did you use a stop bead against the frame?

 

[Shakey1234200]

Looks like a quality job. Black windows are a nightmare to keep clean. Did you use a stop bead against the frame?

Thanks mate! Yeah I used stop beads against the windows just to prevent any cracking from the windows moving slightly. I used stop beads up against the brick too. The render is over cement board.

 

[Hhj]

Thanks mate! Yeah I used stop beads against the windows just to prevent any cracking from the windows moving slightly. I used stop beads up against the brick too. The render is over cement board.

What type of mono did you use and how thick did you go mate?

 

[Shakey1234200]

What type of mono did you use and how thick did you go mate?

K1 white with hp12 base coat over 12mm render carrier boards. Cut 100mm slivers of mesh and double meshed the joints in the board then went over whole area with mesh . I went with 10mm beads so I put a really tight scratch coat on with the mesh, I would say around 3-4mm and then k1 white on top. K rend don’t recommend using the k1 over render boards, they said to use the thin coat due to the weight but they did say it should be ok if it’s only upto around 10sqm and you set your battens under the cement board 300mm apart which I did for extra strength.

 

[Hhj]

K1 white with hp12 base coat over 12mm render carrier boards. Cut 100mm slivers of mesh and double meshed the joints in the board then went over whole area with mesh . I went with 10mm beads so I put a really tight scratch coat on with the mesh, I would say around 3-4mm and then k1 white on top. K rend don’t recommend using the k1 over render boards, they said to use the thin coat due to the weight but they did say it should be ok if it’s only upto around 10sqm and you set your battens under the cement board 300mm apart which I did for extra strength.

Thought they would have specked hpx & lw1

 

[Shakey1234200]

Thought they would have specked hpx & lw1

I did think hpx after seeing it said on here a fair bit but spoke to k rend and the place I picked the k rend up from and they both said hp12 with cement board.