K rend

[S a plastering]

put some ft on this morn when try ing to spat it was tearing
in places am I ruling too soon or putting it on too thick in
one go it was doin me swede in it was on hp12 scratched
up Ok though

 

[jackom]

what thickness was it mate and one or 2 passes

 

[DannyMac]

I give it a mist of water and pull a speedskim over it. After the serrated edge that is.

 

[Gibbo]

put some ft on this morn when try ing to spat it was tearing
in places am I ruling too soon or putting it on too thick in
one go it was doin me swede in it was on hp12 scratched
up Ok though

just leave under the rule no need to spat monk

 

[spunky]

Sounds like its skinning

 

[Arti]

I give it a mist of water and pull a speedskim over it. After the serrated edge that is.

Does that gear not fu@k the blade up danielson?

 

[keithuk]

put some ft on this morn when try ing to spat it was tearing
in places am I ruling too soon or putting it on too thick in
one go it was doin me swede in it was on hp12 scratched
up Ok though

wet down your spat and don,t leave it to long ,sometimes the wind can put a crust on it to

 

[DannyMac]

Does that gear not fu@k the blade up danielson?

Not that I've noticed mate.

 

[S a plastering]

just leave under the rule no need to spat monk

cheers pal im finishing it off next week will give it a whirl

 

[plasterjfe]

Sounds like its skinning

yeah sounds like - due to not ruling soon enough no doubt and it would pull in onto hp12 dry scratch coat. try get it on faster and rule straight away