krend per m2

Status
Not open for further replies.
Depends how much you got to go at mate and whether it's a domestic or for a builder i've heard others talkin £12 per mtr and some £15-£18 all depends on how much you got mate and how much you can do in the day, are you hand or machine applying , i recently got £35 a mtr supply n fix on a domestic for 180m2
 
as a subby the best price ive seen was £13 perm labour .........not sure inc the base coat mate
 
theres 120m2 roughly iam krend approved but i hate the stuff thinking maybe trying webber never used it before but i hear it the dogs b*ll***s ill be applying by hand just me and the labradoodle its a bungallow no scaffolding i have allways went by hour but im sick of making no money thought id give this 1 a price
 
THE GUY GOT MY NUMBER FROM KREND HE IS DOING A SELF BUILD AND WANTED TO TRY A SCRAPPED FINISH BUT YOU NO WOT KREND IS LIKE IN WINTER TAKES A WHILE SO I PHONED THEM TODAY AND ASKED ABOUT AN ACCELERATOR ANYWAY THEY DONT BUT I SEE WEBBER DO IS THE WEBBER SCRAPE FINISH BETTER ???????
 
why do you hate krend, i find it really nice to spray and use. I wouldnt use weber, lots of problems with it at the moment. Monorex is good gear along with Primo colour form lord and downing.
 
simplybesty said:
why do you hate krend, i find it really nice to spray and use. I wouldnt use weber, lots of problems with it at the moment. Monorex is good gear along with Primo colour form lord and downing.
[/

I HAVENT DONE A GREAT DEAL OF SPRAYING BUT I FIND KREND GOES ON BETTER WHEN SPRAYED ITS A PAIN TO APPLY BY HAND I DONT HAVE THE BIG JOBS TO USE A SPRAYER
Click to expand...
 
ive never tried this i was told about it ............get two butts and after mixing them both go back to the first and put the whisk through it again apparently it comes out like hardwall
 
if you are doing it by hand use a board and stand much quicker than f**k**g your wrist up getting it out of a tub
 
spunky your sort of right, some materials have a minimum mixing time (normally as it needs extra time to break down the silicone in the material) and others perform better if you mix them let them stand for 5 mins then mix them again ,
 
i had some plasterers at me a few month back krend wasnt applying properly i went to watch they were chucking it in mixer for 2 min then on walls then the floor as you rightly said the silicon has to disolve and the polymers expand .its all in the mix boys ;D ;D
 
Status
Not open for further replies.

Share this page

Back
Top