S a plastering
Private Member
can it be done got one to look at its about 9 inches square if so what's the best way cheers
Cut it out with a disc cutter small . It can be done but your always see the join ?can it be done got one to look at its about 9 inches square if so what's the best way cheers
is that just like the 1.5 bucket coat mate so just prime on top of the mono then top coat with thisYou can prime it and TC 15 over the top
Sent from my iPhone using Tapatalk
what about the square repair first should that be done with krend again or just some OCR or something firstIf it's flat no bumps but just the finish is not great. You can prime with the TC primer in the colour you want then TC over the top which means no hacking off no re beading cos it's just 1.5 mm over the top. Yes comes in the tubs I just add a little splash of water and a quick spin.
Sent from my iPhone using Tapatalk