lurpak
Artex Boy
Finishing painting primer. Might. Top coat a panel or two after. Still think it's a sin covering good. RubbingView attachment 32273View attachment 32274
That bead on piss or my eyes
Finishing painting primer. Might. Top coat a panel or two after. Still think it's a sin covering good. RubbingView attachment 32273View attachment 32274
Must be a big f**k*r to reach that flusher.Poshest toilet iv ever fitted View attachment 32277
I was going to have one like that but it just didn't work in our layout. Not that expensive if you shop around.Poshest toilet iv ever fitted View attachment 32277
They won't have kids anyway.Must be a big f*kr to reach that flusher.
I've been doing quite a bit of carpentry on our current job due to a moody builder. Really quite enjoying it.Today I’m mostly pretending to be a chippy with leftover studView attachment 32280
These are expensive mate, the make is called Burlington it’s probly the best sanitryware you can getI was going to have one like that but it just didn't work in our layout. Not that expensive if you shop around.
Never ending job that when kids start jumping in it. Nice carpet btw
Frames likely mate. Windows awful shape, twisted, in crooked.,nightmare. Beads are plummedThat bead on piss or my eyes
Frames likely mate. Windows awful shape, twisted, in crooked.,nightmare. Beads are plummed
I didn't set any beads in those panels tbh so I couldnt say if they are off or not. But the windows I did set and the beads in the inside were all every shape, know who fitted the windows and it makes sense they so bad tbh. LolAye. Frames. That'll be it.
Top pic. What's the extra blocks for?I've been doing quite a bit of carpentry on our current job due to a moody builder. Really quite enjoying it.View attachment 32281View attachment 32282
If it's the blocks I'm thinking of Steve they're set tight against the steel to stop any movement as nothing is fixed into the steel. None of the timbers that the board is fixed are tight against the steel so that if/when the steel expands slightly it won't push on anything carrying the board.Top pic. What's the extra blocks for?
Have you got the front or rear seat mate
Ah yes. A quick zoom shows that right. At first glance they looked flush. That's what puzzled me.If it's the blocks I'm thinking of Steve they're set tight against the steel to stop any movement as nothing is fixed into the steel. None of the timbers that the board is fixed are tight against the steel so that if/when the steel expands slightly it won't push on anything carrying the board.