mono accelerator

Status
Not open for further replies.
Jgreenplastering

Jgreenplastering

Private Member
Tried searching on the app but can't get any results come up at all!

Anyone used a non Weber accelerator for Weber Pral?

Thinking of using tomorrow but can't get to any merchants to buy weber one.

Cheers
 
Thanks for that.
Just looked online but no info on usage.
Says 250ml to 25kg cement but 25kg isn't all cement.
Do you use a set amount?
 
Ask them to get you some in. My local Wickes never had enough in stock so the assistant said I could order it in. Bought 10 used 4 then the thr Ritmo nearly died of accelerator poisoning. Had Les give it some intensive care and brought it back to life.
 
Used the weber stuff today and was great.
Layed on by 11.30 scraped swept and cleaned gone by 5.
Def gonna buy some but prob try wickes stuff.
Cheers lads.
 
Use a filter on your water butt , no one has had any problems with Wickes , maybe John has used other products if I remember rightly . I have been using it for 4 years , we only render so use a lot to be honest
 
I only used Wickes. But used it often. Can't be arsed with 12 hour days.

I have been advised to give any accelerator a good stir. Maybe the G4 water bits are bigger than the Ritmo's? But Stu's G4 had the same problem.

Going to use Parex stuff and see if that works.
 
Stu did not have any problems with Wicks John ,sorry if i got confused mate !,getting old , the brain goes !lol
 
I cant see how those filters will stop residue on the valves. It is liquid not debris, it will simply pass thruogh the filter with the water?

It is something to do with the anti corrosive additive in frost proofers.
 
I have used the K-Rend stuff got it from CCF not a bad price and works a treat. Last job 2 weeks ago Weber Pral m layed on by 11am started scratching back about 2pm and it was damp conditions.
 
Status
Not open for further replies.

Share this page

Back
Top