Mono Corners

Status
Not open for further replies.
Arti

Arti

Well-Known Member
Alreet Lads...........Doing a mono job in a few weeks and its gonna be my 1st time doing the angles by hand with mono. Whats the fail safe way to scratch the angles without taking chunks out of them??

Love

Arti

xxxxxxxxxxxxxxx
 
U meaning internals arti ? Just curious me self aswell a want to get into the coloured stuff abit , havnt done any yet like :RpS_mad:
 
I did one in Weber 2 years back. Got 3x1 pse wedged tight around the reveals in the openings and sprayed out to them then carefully took then off and had someone hold up a straight edge whilst I did the reveals.

Scratching back I did the same. Looks nicer formed in my opinion but too much faffing about.

On the corners where I was going to do next day I had the 3x2 bevelled.
 
Same as above @Arti , you going for same day mate ?,better if you do **** up , which i know you wont :RpS_wink:
 
Last edited by a moderator:
Stayed at a huge hotel in the Canary Isles this winter. All Fine agg mono with no beads anywhere. Not a miss to be seen. Probably the best mono I have ever seen.
 
Rigsby said:
Stayed at a huge hotel in the Canary Isles this winter. All Fine agg mono with no beads anywhere. Not a miss to be seen. Probably the best mono I have ever seen.
Click to expand...
Hard to see them missing through a wine glass mate :RpS_wink: , so you don,t even chill out on Holiday , be honest i,m the same does the wife's head in :RpS_blushing: hope all is going well mate :RpS_thumbup:
 
keithuk said:
Hard to see them missing through a wine glass mate :RpS_wink: , so you don,t even chill out on Holiday , be honest i,m the same does the wife's head in :RpS_blushing: hope all is going well mate :RpS_thumbup:
Click to expand...

I have observed rendering done all over the world. Best place Napier in NZ. The Art Deco City of the world.
 
keithuk said:
Same as above @Arti , you going for same day mate ?,better if you do **** up , which i know you wont :RpS_wink:
Click to expand...

aye marra same day............if i post a picture of me crying into my pint you know av fu@ked it up......................:RpS_laugh:
 
Arti said:
aye marra same day............if i post a picture of me crying into my pint you know av fu@ked it up......................:RpS_laugh:
Click to expand...
Your be fine mate :rolleyes) it,s the guys that don,t worry about it **** it up
 
Arti said:
oooooooooooooooo check out the connoisseurs of architecture
Click to expand...
Be honest mate i love it , i have had a customer asking me to price an Art Deco house to mono ,i said it would look **** , sometimes the detail is so important , call me sad :RpS_crying:
 
keithuk said:
Be honest mate i love it , i have had a customer asking me to price an Art Deco house to mono ,i said it would look **** , sometimes the detail is so important , call me sad :RpS_crying:
Click to expand...

I know what you mean. Had some old bloke today ask me to pebble dash a lovely sand stone cottage.........:-0.....................I declined
 
Arti said:
I know what you mean. Had some old bloke today ask me to pebble dash a lovely sand stone cottage.........:-0.....................I declined
Click to expand...
So when are you going to mono it :RpS_wink: it is not always about the money mate , well not when i,m busy :RpS_wink:
 
champion..........ya can giz a hand with these fewkin corners..............:RpS_wink:
 
If you're cutting back mono with out beads on an arris, make sure you put plenty on so your not cutting back to your mesh, I use an ibar to drag back from the opening vertically from the opening, gives you a cleaner edge.
 
keithuk said:
No mate , don,t see the point ,unless it is being ashlar cut
Click to expand...

Not only that's it a weak spot
especially around a door where it gets traffic and liable to get knocked a upvc bead will take a bit of a knock with out damage
 
Rigsby said:
Stayed at a huge hotel in the Canary Isles this winter. All Fine agg mono with no beads anywhere. Not a miss to be seen. Probably the best mono I have ever seen.
Click to expand...

I saw a similar spectacular job in Cuba last year, I was taking pictures of the render, whilst the mrs was taking pictures of the wildlife etc, sad I know, but it never leaves you.
 
owls said:
I saw a similar spectacular job in Cuba last year, I was taking pictures of the render, whilst the mrs was taking pictures of the wildlife etc, sad I know, but it never leaves you.
Click to expand...
She might Owls :RpS_scared: :RpS_wink:
 
just noticed, its arti these days,
whats with the name change, is it like the singer prince , where youll just be known as a symbol soon. :huh:
 
owls said:
im similar not got a clue how to post up pictures, whats photo bucket artisan ?
Click to expand...

Photo bucket is a site, you sign up then you can upload pics and then copy URL to this site which will then post whatever picture you want...

Danny did a video not so long ago showing people how to use it..

Sure it's on youtube
 
owls said:
just noticed, its arti these days,
whats with the name change, is it like the singer prince , where youll just be known as a symbol soon. :huh:
Click to expand...

The artist formerly known as artisan.........or TAFKAA..................:RpS_thumbup:
 
Status
Not open for further replies.

Share this page

Back
Top