mp75/hardwall job in north devon

[User___removed]

looking for a crew to carry out approx 700m2 of either mp75 of hardwall in sunny north devon.spec is hardwall but looking to change it to mp75 so a machine would help.email [email protected]

 

[spunky]

Why are you changing it to mp75?

 

[Runswithscissors]

Hi Bobby

If you get no joy - drop me a mail and I will have a local Knauf guy get in touch to help you out!

Good Luck

Richard Lord
[email protected]

 

[wiganlad]

Depending on the dates I can b available . I've pm u

 

[User___removed]

im gonna tackle this 1 myself now due to another job falling through.i`ll use my ritmo so should be alot dfferent to hand balling the hardwall around.!!
im going to speak to knauf next week to find out the do`s and don`ts.any tips by anyone who has used mp75 with a ritmo or any other machine?
also whats the setting time for the gear?

 

[PFTwales]

bobby when you starting this one

 

[spunky]

Its like porridge to rule you need to rule it twice and look after you're angles ceilings and skirting lines you can't cut it back like hardwall, good stuff on the right job though you could do miles of it

 

[User___removed]

booked in for monday 20th may.millions of beading first so have a bit of time yet.some good runs also so thats ok.

 

[User___removed]

is it worth giving you a bell ian b4 the job starts?

 

[spunky]

Have you done it before?

 

[User___removed]

no.tons of float and set though

 

[spunky]

Get some angle plains and waffle floats for the angles