Mtec M200 Roughcast finish

[Samtheplasterer]

Hi

I've been told it's possible, and have looked through the existing threads on the subject but none actually get to the point.

Has anyone achieved Roughcast finish?
What setting / gun position /speed did you find best?

We have her set up now with sample panels made up ready to have a play. I'll feedback my results but more experienced info & tips would be invaluable.

Thanks lads
Sam

 

[bobski]

Pretty sure its speed 2 mate.

As for the rest @Plasterers1StopShop and Dave Anderson will say.

 

[Plasterers1StopShop]

Hi

I've been told it's possible, and have looked through the existing threads on the subject but none actually get to the point.

Has anyone achieved Roughcast finish?
What setting / gun position /speed did you find best?

We have her set up now with sample panels made up ready to have a play. I'll feedback my results but more experienced info & tips would be invaluable.

Thanks lads
Sam

Hi Sam,

Yes, 100% possible. If you call Andy on 07966 394864 he’ll be able to advise mate

 

[theclemo]

I'd love to roughest a site with the diesel and ritmo going st the same time. £££££££££££££

 

[Samtheplasterer]

Hi Sam,

Yes, 100% possible. If you call Andy on 07966 394864 he’ll be able to advise mate

Cheers,
Yeah we were going to call the machine guru but figured it out now
Speed 2, stiffer gear and moving the nozzle forward a touch gave us a nice finish

 

[Danny]

Cheers,
Yeah we were going to call the machine guru but figured it out now
Speed 2, stiffer gear and moving the nozzle forward a touch gave us a nice finish

glad all is well

 

[bobski]

Cheers,
Yeah we were going to call the machine guru but figured it out now
Speed 2, stiffer gear and moving the nozzle forward a touch gave us a nice finish

Good stuff.

Are you rough casting pre bagged or your own mix?