Plasterboard.

[MIXERMAN]

Wot are the + plus on giproc boards for

 

[TonyM]

If you mean the marks running down at 600mm, they’re suggested screwing points.

 

[John j]

They are if studs are 600 centers

Any of you lot seen the screwing competition in b n q . £1 to guess the screws and win a de wault drill bit set
£2 fastest screwer win a dewault drill

 

[ChrispyUK]

Wot are the + plus on giproc boards for

orientation of the boards. There is a ‘-‘ on the opposite side spaced at similar intervals.

Be careful how you stack them, as you will either be like Ali Baba, or you won’t get the c**ts apart!

 

[mark hoare]

Day one nvq plaster boarding or what ever s**t they call it today spacing on the boards, why does it say plaster other side only on boards derrrr,, No wonder the industry is f**k*d.

 

[John j]

Day one nvq plaster boarding or what ever s**t they call it today spacing on the boards, why does it say plaster other side only on boards derrrr,, No wonder the industry is f**k*d.

What it should say is plaster other side only......but if you cut one back to front just put it on as it will be ok