plasterers 1 stop shop

[roryston]

@Plasterers1StopShop

After a spot / mortor stand for a taller plasterer

My current one is to low for me !

Have you got any in stock ?

Ta xx

 

[Smudger1]

And any mesh with larger holes to bed in s&c ? Ta 2.

 

[A.plasterer]

And a bacon n egg roll with a cuppa tea please

 

[Smudger1]

In a tpf mug would be nice

 

[Arti]

And any mesh with larger holes to bed in s&c ? Ta 2.

TV10?

 

[Vincey]

And can you do a pallet of unifinish for £160 inc vat ?
Thanks

 

[Plasterers1StopShop]

We have a new mesh coming soon. A HQ Range from a major manufacturer in Germany

Unfortunately we don't do spot stands

 

[flynnyman]

@Plasterers1StopShop

After a spot / mortor stand for a taller plasterer

My current one is to low for me !

Have you got any in stock ?

Ta xx

If you have a small stand just put 4 lengths of 22mm copper pipe on each corner to the height you like.

 

[Rossi46]

And any mesh with larger holes to bed in s&c ? Ta 2.

This sort of size?

 

[Smudger1]

TV10?

MC plasterer mentioned TV10 too and only 1 said it's s**t so IL try n get some of that in ta.
Tpf Cheltenham got it he said ? So who runs that shop ?

 

[Marshy]

Rhino can you sort out me a big titted Milf please !?

 

[Marshy]

We have a new mesh coming soon. A HQ Range from a major manufacturer in Germany

Unfortunately we don't do spot stands

Is it from Mesherschmitt???

 

[Plasterers1StopShop]

MC plasterer mentioned TV10 too and only 1 said it's s**t so IL try n get some of that in ta.
Tpf Cheltenham got it he said ? So who runs that shop ?

We have the TV10 mesh in stock at our Cheltenham depot

 

[Plasterers1StopShop]

Rhino can you sort out me a big titted Milf please !?

On route mate

 

[Arti]

T

This sort of size?
View attachment 16593

That's only TV 8

 

[Danny]

@Plasterers1StopShop

After a spot / mortor stand for a taller plasterer

My current one is to low for me !

Have you got any in stock ?

Ta xx

what stand do you currently have?

You could slip on some bigger tube onto the kegs

 

[roryston]

what stand do you currently have?

You could slip on some bigger tube onto the kegs

I have no idea its a old homemade one does the job but obviously being 6.7ft its a little low for me....

@flynnyman suggested the same but mine box section legs

Might run it down to the engineer place down the road and see of they can make something for it

 

[Rossi46]

T

That's only TV 8

Yes, TV 8 feel great. Especially round the arse.

 

[Danny]

I have no idea its a old homemade one does the job but obviously being 6.7ft its a little low for me....

@flynnyman suggested the same but mine box section legs

Might run it down to the engineer place down the road and see of they can make something for it

Cant you weld?

 

[roryston]

Cant you weld?

No I've always wanted to learn though, I have a mig welder that ive yet to use

 

[flynnyman]

I have no idea its a old homemade one does the job but obviously being 6.7ft its a little low for me....

@flynnyman suggested the same but mine box section legs

Might run it down to the engineer place down the road and see of they can make something for it

Get some plastic waste pipe and do the same or box shaped down pipe depending on the size.

 

[Danny]

No I've always wanted to learn though, I have a mig welder that ive yet to use

Ah I figured because you mucked about with old cars you would

get some box section and have a play If I was nearer I would gladly weld it up I have a tig welder and it is the best skill I have learned

 

[Gibbo]

I have no idea its a old homemade one does the job but obviously being 6.7ft its a little low for me....

@flynnyman suggested the same but mine box section legs

Might run it down to the engineer place down the road and see of they can make something for it

Mines box section and the tubes fit fone on it

 

[Marshy]

Doughnut puncher

 

[Olican]

@Plasterers1StopShop

After a spot / mortor stand for a taller plasterer

My current one is to low for me !

Have you got any in stock ?

Ta xx

I had one made to suit my height at a local steel fabricators, made from 1" square steel . Paid the chap £15 [emoji106]

 

[Danny]

I had one made to suit my height at a local steel fabricators, made from 1" square steel . Paid the chap £15 [emoji106]

baragain!!!

 

[duke163]

I cut 4 pieces of steel pipe to slip over the top of the stand to make it higher when using stilts.

 

[Squarehead]

We have a new mesh coming soon. A HQ Range from a major manufacturer in Germany

Unfortunately we don't do spot stands

Sounds interesting, in what way will it be better? I'm using mesh in loads of internal skimming at moment on Victorians and celings. Reduces hairlines greatly.

 

[Plasterers1StopShop]

Sounds interesting, in what way will it be better? I'm using mesh in loads of internal skimming at moment on Victorians and celings. Reduces hairlines greatly.

We will have one which is designed for Plaster.

The gr/m2 of the Mesh will be the one most suited to each system we supply. There are lots of different Mesh's on the market, many fray etc and are actually quite weak. The ones we have are from potentially the best German manufacturer around

 

[Marshy]

We will have one which is designed for Plaster.

The gr/m2 of the Mesh will be the one most suited to each system we supply. There are lots of different Mesh's on the market, many fray etc and are actually quite weak. The ones we have are from potentially the best German manufacturer around

MESHerschmitt thought was quite funny for me lol

 

[Squarehead]

We will have one which is designed for Plaster.

The gr/m2 of the Mesh will be the one most suited to each system we supply. There are lots of different Mesh's on the market, many fray etc and are actually quite weak. The ones we have are from potentially the best German manufacturer around

When's Fritz sending them over?

 

[Formby plastering]

How much a roll @Plasterers1StopShop

 

[Marshy]

How much a roll @Plasterers1StopShop

About a metre wide aren't they lol ??

 

[Plasterers1StopShop]

How much a roll @Plasterers1StopShop

All prices will be revealed soon. WE have a good range and they will be competitive

 

[themucky1]

We will have one which is designed for Plaster.

The gr/m2 of the Mesh will be the one most suited to each system we supply. There are lots of different Mesh's on the market, many fray etc and are actually quite weak. The ones we have are from potentially the best German manufacturer around

Sto? ? ?


Sent from my iPhone using Tapatalk