Frustrated DIY plasterer
New Member
I have a problem where the finish coat of plaster has literally fallen off the wall with the tiles. I cleaned off the wall and applied 4 coats of PVA mix (4:1) and a final coat of PVA(3:1) prior to applying finish coat. After a while whilst drying out this coat started to egg-shell crack allover. I've removed this coat and am now wondering what to coat the wall with to stop it absorbing moisture from finish coat. I've looked at SBR Bond, Febond Blue Grit, Zinsser Drywall Pro 2-in-1,Thistle Gypprime but am totally confused as to what to use. I need to seal the wall and apply a bonding coat but with what? Any advice would be appreciated.
Thanks Frustrated DIY Plasterer
Thanks Frustrated DIY Plasterer