putzmeister utiform v2

Status
Not open for further replies.
spunky

spunky

Private Member
does anyone know how long these have been around? also are they any good?.........ive been offered a machine for £3000 ish its diesel but just by looking at it i'd guess it to be a utiform.......its a bit battered and bruised but works solidly and has been serviced ..........it was bought locally about 3 years ago and the chap who sold it came to give the lads a demo.........never know it might be someone off here ;D
 
sp11 are good machines and very strong , only down side to them is there a pain in the arse to clean as you have 2 hopers to clean out
 
what do you think for the money monkey?.......he wants 3500 its probably pre 2000 looking at it
 
I was lookin at these last year mate , they look quality and good all round machine upside is you don't need a genny and you can slap it on a tow hitch , downside as monkey say's is the cleanin lark ,but if your runnin a big job cock on , definitely worth the money
 
if it's in full working order 3500 aint a bad price , you can't really spray hardwall and mp75 with them but for renders they are the mutts and for liquid floor screeds , the other downside to them is you need to get the mix right every time , if you have it to stiff then it will struggle to pump it and the material stays in the rotor and stator to long and it dis colours the material (big problem if your using a through coloured render) to wet and it rolls down the wall so you have to pump it back into the mixer to stiffen it
 
thats what i was thinking warrior....cost me a fortune in diesl though ;D........why are they no good for internal stuff monkey?
 
because the material starts to set on the paddles and the auger , it just clogs them all up so you can't leave any material sitting in the mixer or the hopper , it does it on electric machines but as they have a smaller mixing zone it's a lot easier to clean and maintain
 
thats fcucked it then ;D.........have you heard of anyone losing a machine through gear setting in it?........on the leccy machines do you clean out after so long or just keep spraying mate?
 
no you'd never lose a machine that way , with the electrics you just clean out at the end of each spray so normally a couple of hours at the most but every other day you need to take the bottom pressure flange off and unclog it as the material builds up there and causes unnecessary back pressure if your just doing renders with it then it's fine , the only other thing is checking your water filters regularly
 
its the way forward mate and if i could sort my life my finances and get some contacts then i'd get one tommorow .........can see why youre all doing it fair play to you .........and that blowjobs still on offer if you get any work coming up you dirty little s**t
 
Spunky , Simply and Monkey have done a few jobs for me, these guys know there s**t, so any advice they give you will be good.Think i`m going to have a Ritmo quite soon.
 
Status
Not open for further replies.

Share this page

Back
Top