pva roller

[S a plastering]

need a new one any ideas on a good one that will last a while cheers

 

[Vincey]

Well I'm out

 

[zolco]

12" roller on a cage frame scuttle with a lid

Sent from my Nexus 6P using Tapatalk

 

[GypsumSnorter]

Harris Vanquish roller, not the 2 handed nonsense but just the big diameter one

 

[S a plastering]

just had one on a frame but kept losing the fuukin nauseating screw that kept coming loose

 

[S a plastering]

Harris Vanquish roller, not the 2 handed nonsense but just the big diameter one

where from pal

 

[zolco]

just had one on a frame but kept losing the fuukin nauseating screw that kept coming loose

Get a purdy adjustable cage, there about 15 quid, no screws to lose

Sent from my Nexus 6P using Tapatalk

 

[S a plastering]

Get a purdy adjustable cage, there about 15 quid, no screws to lose

Sent from my Nexus 6P using Tapatalk

where from mate

 

[Pug]

12" roller on a cage frame scuttle with a lid

Sent from my Nexus 6P using Tapatalk

This is what I use. No fecking about mixing up little bits of pva. Pull it out of the van. Slosh where you need it. Stick the lid on an chuck it back int the van.

 

[zolco]

where from mate

Screwfix, dulux, brewers definitely stock it

Sent from my Nexus 6P using Tapatalk

 

[zolco]

This is what I use. No fecking about mixing up little bits of pva. Pull it out of the van. Slosh where you need it. Stick the lid on an chuck it back int the van.

Great minds think alike

Sent from my Nexus 6P using Tapatalk

 

[Rossi46]

need a new one any ideas on a good one that will last a while cheers

I like those Harris Powercoat. Seem to last a good while

 

[S a plastering]

Get a purdy adjustable cage, there about 15 quid, no screws to lose

Sent from my Nexus 6P using Tapatalk

cheers mate ordered one off amazon they look the nuts

 

[Danny]

I always had a cheap roller and skuttle then had PVA pre mixed in big containers...

 

[GypsumSnorter]

where from pal

B&Q/Tradepoint for the roller and sleeve, then u can get replacement sleeves from B&M also

 

[Danny]

B&M also

dud durrr dud dud doll B N BN

 

[jamesthefirst]

I use the cheapest I can get wrapped in a tesco or morrissons plastic bag when done!

 

[GypsumSnorter]

dud durrr dud dud doll B N BN

Is that the EastEnders drums? lol

 

[mashman]

What kind of roller ffs the next one will probably be are white bristles better than black bristles on a brush ffs

 

[GrantyBoy]

What kind of roller ffs the next one will probably be are white bristles better than black bristles on a brush ffs

I find black more pleasing to the eye. Anytime I've used white bristles they haven't held much water.

 

[Squarehead]

Wickes medium pile roller, 1&3/4 inch. Spongy and holds PVA well, last a few weeks. £2.49 each, use it for painting at home too

 

[Natwasere]

Cheapest value one from wickes. Wouldn't say it lasted but them cheap you yellow heads work well for going over all kinds of rubbish, when finished in a bag. Does everyone just use 1 ratio or like me use different for priming and bonding?

 

[Pug]

Cheapest value one from wickes. Wouldn't say it lasted but them cheap you yellow heads work well for going over all kinds of rubbish, when finished in a bag. Does everyone just use 1 ratio or like me use different for priming and bonding?

Half and half on everything.

 

[Natwasere]

That's what the old boy that taught me did. Don't know why I changed, wondering if weaker primer and stronger bonding coat is just a faff now lol

 

[Squarehead]

Milky for high suction, then 70 pva 30 water on top. 70/30 on anything else.

 

[Danny]

Is that the EastEnders drums? lol