recommendations of products and professionals needed for self-coloured render

Status
Not open for further replies.

mungomuffit

New Member
Hi, I'm in the process of renovating an old house in London. I need to replace the soffits, which are made of old-fashioned horse hair plaster. I also want render applied on a new stud wall on a top floor small balcony.

I want to use a self-coloured render because I don't want the huge expense of hiring a scaffold every 5 years to re-paint.

I've spoken to Weber a few times, but am totally confused now as to what to use.

Is there anyone on this site in the SW17 area of London who could maybe come and do a site visit with a view to doing the work? Or if not, can any of you head me in the right direction of what product to use so that I can find a contractor?

many thanks, MM
 
Hi MM

Please see the attached which shows the details for the Knauf Aquapanel Exterior Cement Board - The Ideal Render Carrier Board : Knauf Aquapanel Exterior

Pages 16 and 17 show soffit details (it can also be applied to timber backing structure), and earlier pages give assistance with regards to stud wall lining. (the brochure is geared towards new build, we can assist further with refurbishments)

We work with over 10 render system manufacturers who all offer products and finishes (through coloured) to be applied to Knauf Aquapanel Exterior. (Weber is also approved, if this is your prefered supplier to match elsewhere)

Feel free to give me a call or drop me an E Mail with more details to allow me to assist further, if required.

As Flynnyman has said, leave some contact details on this thread so that someone local can contact you to arrange to come and price the work (an E Mail address is usually best, you can ignore or delete them if you need to), or just say, please leave your details and you can then make contact yourself.

Good Luck!

Richard Lord
Knauf Aquapanel Specification Manager
07918766577
[email protected]
 
Status
Not open for further replies.
Back
Top