Rendering pumps

[Leetodd]

Hi,

Being doing a lot of k rend lately but I'm trailing it on. Need to invest in a pump. One that mixes the stuff too.
Just wondered if anyone had any ideas on what one is the best. Don't want to spend a fortune!! Was thinking around the £6000 mark.
Also be handy if I could use it for multi finish!
Cheers Lee.

 

[keithuk]

Ritmo mate ,pft boys will be along soon ,loads of machine guys on here :RpS_thumbup:

 

[CTPlastering]

Defo ritmo by sounds of it mate

 

[scogs]

We use a Ritmo l and it's the dogs. Are you doing site work?

 

[Leetodd]

Thanks guys. I have made an enquiry to ptf about the ritmo. I'll see what they come back with.
Mainly just domestic stuff. A house here and there so not like I'm going to be doing blocks of flats or anything.
Has anyone used it with multi finish? Is it worth using for finish?

 

[keithuk]

Thanks guys. I have made an enquiry to ptf about the ritmo. I'll see what they come back with.
Mainly just domestic stuff. A house here and there so not like I'm going to be doing blocks of flats or anything.
Has anyone used it with multi finish? Is it worth using for finish?

domestic stuff no mate , we have a g4 but mainly do mono

 

[Rigsby]

Ritmo M or L. The M will go as far as 15m and the L 20m. You will need a bit more than £6k though for a complete new set up. The skimming kit is an extra so that could come later but most use the skim set for site work. Remember there are usually extra's you may want to the the basic kit.

Try looking for a kit on here or ebay seconhand, but not the one that is on ebay at the moment.

 

[BobbyJack]

Welcome along mate. Hopefully you get sorted soon enough. This might help @Plasterers1StopShop