Spray render machine

Status
Not open for further replies.
Karl79 said:
Looking for a cheap second hand electric machine for rendering if anyone knows anyone selling one
Click to expand...
Karl new they are not a lot mate , if you are thinking it is the way forward for you ,go for it ,and it will knock a big hole in you tax bill
 
I use machines everyday but there the company's I work for we use putsmaister diesel we do have a pft g4 but was looking at getting one of my own how much are they new
 
28-07-2013, 08:26
nickelarse on here has a good g4 for sale mate , new have a chat with PFTnorthern
 
Ok mate cheers for the advice how do I get hold of him I'm new to this site so don't really have a clue of how to do it
 
Karl79 said:
Ok mate cheers for the advice how do I get hold of him I'm new to this site so don't really have a clue of how to do it
Click to expand...
I think i have sent him a pm mate :RpS_confused: wait around for a bit , or come back online tomorrow ,all the best mate
 
the diesel putz you use at work could be like tow on the back of the van job all built in, if so this is expensive kit £15k or more perhaps

a G4 would be more suited for a personal ownership as in yourself and another guy plus maybe a labourer. and much cheaper

the lads that have dealerships are on here they will help you out
 
Cheers mate yea just me n my mate were thinking of getting the g4 or something like it cuz it would be just the 2 of us the putz are good machines but u need somewhere 2 store them how do I get hold of the dealers on here plz
 
Karl79 said:
Cheers mate yea just me n my mate were thinking of getting the g4 or something like it cuz it would be just the 2 of us the putz are good machines but u need somewhere 2 store them how do I get hold of the dealers on here plz
Click to expand...
i have a g4 , good bit of kit ,got it from pftnorthern ,never looked back
 
@Karl79 We are distributors of machines from m-tec and Lancy. We have a range of new machines avaliable and also a range of used machines from PFT and M-tec. We also offer the option to hire the machines as well. All machines will come with training and warranty.
Please give us a call on 01242 236699 and we can help find the right machine for you.

Ryan
 
Last edited by a moderator:
That Monojet on ebay is good for £2.5k. 3 phrase so plenty of power to pump long and high. Same performance as a G4 but smaller and lighter and easier to move around. Comes with a decent genny too.

If you buy privately get it to PFT Northern and have it serviced. It will come back as new. While it is there you can become PFT approved and get trained in using the machine but if you have had a G4 there will not be much difference except the Monojet does not have a star wheel.
 
The company I work for used to have a mono jet there not to bad do u know how much a service is @Rigsby
 
Last edited by a moderator:
a service will be more like the dealer giving it a once over to make sure it up to scratch and any little bits that never got seen to when they needed it brought up to date, other than that you take good care of it and it will be very very low maintenance. sometimes people abuse em thats all.

PFT northern did mine when i got it and they looked it all over and really there wasnt that much wrong at all and the good thing is however little work it might need they are straight down the line like they will tell you if it doesn't need anything doing rather than just charge you for doing nowt.
 
My mono jet does about 5 jobs a year and I take it in once every 2 years. The last service was 1 hours labour charge as there was very little to do to it. Les will if you buy a machine off him will show you how to service it yourself (to a point) in with the price of the machine otherwise if a private sale a small fee on how to set it up, use it , clean it and maintain it. It will be worth every penny as there is more to the machine than knowing how to spray.

He will only do what needs doing but you will have a safe sound machine after he has serviced it. If you are miles away send it on a pallet and get trained up on collection.
 
plasterjfe said:
a service will be more like the dealer giving it a once over to make sure it up to scratch and any little bits that never got seen to when they needed it brought up to date, other than that you take good care of it and it will be very very low maintenance. sometimes people abuse em thats all.

PFT northern did mine when i got it and they looked it all over and really there wasnt that much wrong at all and the good thing is however little work it might need they are straight down the line like they will tell you if it doesn't need anything doing rather than just charge you for doing nowt.
Click to expand...
I wish i kept that machine john
 
Status
Not open for further replies.

Share this page

Back
Top