Stair Winders

[essexandy]

Talk in other recent topics about trowel size and type has got me wondering how you guys that use large trowels and Perma shape trowels get on with plastering stair winders, I can't imagine doing them without my old curled up girlie little trowel.

 

[simplybesty]

its simple mate, a good spread has all sizes and tools, midget upto 24" spats .

 

[napper83]

why only a 24" spat go the whole hog an get a 40"

 

[phippsy333]

but for a winder i use a 1mm thick piece of plastic ...bends and moves with the conrure of the winder ..particularly good for inverted winders....

 

[simplybesty]

because im tigth and aint spending a £100 on a 40" spat

 

[essexandy]

its simple mate, a good spread has all sizes and tools, midget upto 24" spats .

Oh bugger, and I thought I was an alright spread, but I've never owned a spatula of any size. Oh well I'll just have to buy myself a variety of spatulas and try harder to reach the giddy heights you've already achieved Simply, but thanks for being willing to pass on such gems of advice to under achievers such as myself. :'(
Your's forever gratefull Andy

 

[S a plastering]

plastic for a stair winder metal trowels wont follow it also tilers grout sponge works well too

 

[essexandy]

I've done plenty of winders and have always used an 11in steel trowel and a miget trowel for tighter bits.

 

[simplybesty]

so you never done mp mr andy then and never used a spat to close up mono after rulling then, i thought you were a spread who had done everthing but i must be wrong, prick

 

[S a plastering]

simpley youve got a real bad greavence you tit

 

[flynnyman]

so you never done mp mr andy then and never used a spat to close up mono after rulling then, i thought you were a spread who had done everthing but i must be wrong, prick

touchy touchy...................tut..............tut...............tut

come on simple i think that £9 plonk has knocked you for six

 

[simplybesty]

what me never, fanny knows i give as good as i get

 

[essexandy]

so you never done mp mr andy then and never used a spat to close up mono after rulling then, i thought you were a spread who had done everthing but i must be wrong, prick

I don't remember claiming to have "done everything" Mr Simply I'm just a traditional spread who tries to do his best.
It's a good thing that you've joined this forum because every pub and public meeting place needs one. I think we make a good pair, if I'm a prick you're definitely a t**t.

 

[simplybesty]

cheers, i like T***s there warm and wet ;D ;D ;D ;D ;D.

 

[potatoe]

legend

 

[spunky]

so you never done mp mr andy then and never used a spat to close up mono after rulling then, i thought you were a spread who had done everthing but i must be wrong, prick

oooooooooooooh jealous ;D

 

[spunky]

why are you using a spat to close up mono you loser cant you use a darby?

 

[napper83]

whats wrong with ruling then scraping?

 

[phippsy333]

I've done plenty of winders and have always used an 11in steel trowel and a miget trowel for tighter bits.

the old crusrt houses i work on andy that have winders...i wish i could use a 11 or midget......lucky if i can get me shoulders thru em.....done 2 of the c**ts with a credit cards and sponge cause theri so tight.....that aint right lol........did 3 last year.......i get the basement tanking job and it always goes hand in hand...earn off the basement leave the winder to last....i feckin hate em........

 

[Gibbo]

andy i got a couple of spats you can have i dont use them they are shite

 

[simplybesty]

dont call me a f**k**g looser. we spat it after ruling because closing it up keeps it back a bit on over night scraps. you would know that if you new what your doing chancer

 

[Gibbo]

just close it in with your straight edge

 

[simplybesty]

everyone to there own grand. everyone i have worked along side uses a spat

 

[Gibbo]

sorry pal dont see the need for them a rule will close it in flatter

 

[simplybesty]

also use them on large ceilings off a pole to do the first flattern, dont use stilts so it makes easyer, i am thinking of getting one of those 40" ones for the mp.

 

[essexandy]

Thanks for the offer of the spats Grand but I bought some years ago, I just preferred to use a trowel. I only said I'd never had one to help Simply enjoy his evening slagging me off.

 

[Gibbo]

if you ever get some panel work in dunmow let me know i would like to see it done

 

[simplybesty]

sorry about that mate, i was a bit pissed and i think you did start it but i always hold my hands up if im wrong ;D

 

[richardbrown]

I must admit a use a spat to close over k rend and when I am skimming large areas its much easier to flatten quickly using a large spat.

There is no right or wrong in this just whatever you find easier... after all isnt that whats its about making the job easy ???.

Rich

 

[essexandy]

I did one in Dunmow 2 weeks ago Grand, not sure when the next one will be, I'll try to remember you next time.
If that last reply was to me Simply not to worry I have beening working on site most of my life and have drunk with some serious wind ups and p*ss takers, I enjoy it as long those willing to give can take 8)

 

[simplybesty]

got to give as good you take mate. grand said your a good spread

 

[Gibbo]

cheers andy if you get any mono i will show you how to use a machine

 

[essexandy]

I'd be interested to see a machine in action, even thought of asking Southern and Simply about popping over to Harlow, even though I'm probably to old to change my ways would still be interesting.

 

[Gibbo]

its not about changing ways the machine only puts it on the wall for you its about making it easier lazy c**ts them germans f**k ooff home friday at 10

 

[spongebob]

You three need to get a room