sto render

Status
Not open for further replies.
S

spen

New Member
done a 90sq metre ceiling in 6mm stolit k on fri had to use sponge float to apply as no chance with steel trowel anyone got any other ideas on how to apply 6mm on ceilings
 
what grain size was it , it comes in a grain size starting from 1.0mm to 6.0mm, you can use a gravity fed hopper gun ......either way on a celing it's gonna get messy mate
 
spen said:
done a 90sq metre ceiling in 6mm stolit k on fri had to use sponge float to apply as no chance with steel trowel anyone got any other ideas on how to apply 6mm on ceilings
Click to expand...
southernmonkey said:
what grain size was it , it comes in a grain size starting from 1.0mm to 6.0mm, you can use a gravity fed hopper gun ......either way on a celing it's gonna get messy mate
Click to expand...
it was very messy i was purple when finished
 
I hate using sto.... such a messy boring job.

I usually apply with a 11inch stainless trowel but im sure you can roller it on !!??

Rich
 
Hi Rich just had a quick look at the website they certainly do a lot of products have you used any and if you have what do you reckon
Lucius
 
I have used most of the systems and if done well look great and if you are the main contractor for the job you can make excellent money.

The problem is that all the sto jobs here in Plymouth are huge so only the big boys get the work who have the men on board and most of them do a s**t job.

They have some right weird systems, last year I was working on a sto job where were were sticking rockwool bats to the exterior of the building using a special adhesive like dot and dabbing but on the outside, then basecoat and mesh then final coat ....
 
Status
Not open for further replies.

Share this page

Back
Top