Thin coat acrylic

[lucius]

Got a job to quote a stitch repair on rendered painted blockwork which involves cutting a meter wide section out of the render obviously the repair will stand out a bit and the surveyor Is saying all the render to come of and redo, I am reluctant to do it as the blockwork is thermalite,may have something to do with the cracking, and the render sound so may cause some disruption thinking of going over the lot in thin coat, can any one recommend a product sutiable over paint.

 

[Plasterers1StopShop]

Hi Lucius,

Do you know what type of paint, i.e Oil Based? Also is the paint a decent quality? Not peeling anywhere? If it is fine you can go over in a Primer called Malech and then Thin coat over the top.

Let me know if you need any prices

 

[Curry]

3mm parinter, 355 avu mesh, 3mm matie. Then primer + dpr. That's the Parex route.

 

[lucius]

Thanks lads what would be a rough cost of mats its around 14m2

 

[warriorupnorth]

couple of hundred mate , roughly

 

[lucius]

Thanks Paul.