weber finishing

Status
Not open for further replies.
plasticfantastic

plasticfantastic

New Member
Has any one got same day scrape with pral m yet?
got a bit on this week and its a drive there and back
trying to make the most of it while Im there?????
its on rend-aid start getting it on about 8am and finish at 11/12ish
 
plasticfantastic said:
Has any one got same day scrape with pral m yet?
got a bit on this week and its a drive there and back
trying to make the most of it while Im there?????
its on rend-aid start getting it on about 8am and finish at 11/12ish
Click to expand...

I will be too dark at 11/12ish?
 
No it would be hard as fack if the weather was like it was yesterday, hence why yesterday we decided against spraying and leaving it on the wall 15 hours before a scratch. This is why im just about to leave to spray now
 
Spring is that hard to tell time of year. Some days it is to cold and it will still be wet at 9pm and other days like here today 13c and windy it will set in the day. If in doubt spray in the evening and scrape next day first thing if you can the lads to work that late.
 
Bah our test block was fine for a scrape this morning. Now sitting waiting for 100m to do its thing.
 
put it on last thing in day then go back in morn,
statring at silly hours and finishing at silly hours bah.
 
yer i know thing is it was 21 yesterday. we were at the job ready to go at about 2ish and bottled it :RpS_crying:
 
put 90 metre monorex gf on friday dinner time on a micro surface,scratched back fine next morn, around 15c
 
Same day now lads defo was rubbed up by 3 today put on about 50m2 of pral m happy days just put some hurry up in it :RpS_thumbsup:
 
depends what your using, your still going to struggle with monorex same day, unless its south facing and getting the sun.
 
Status
Not open for further replies.

Share this page

Back
Top