Weber OCR

Status
Not open for further replies.
essexandy

essexandy

The Lake Governor
After some comments on a previous topic I am interested to know how many m.sq. of render you guys finish in a day using Weber OCR, please allow for any time beading up and any other prep needed.
 
Re: OCP

Are you on about mortar render Andy, or prebagged OCR? titles a bit confusing mate.
Dont use mortar myself anymore, so id do about 70m2 a day if i can with ocr (spraying). Allow a couple of hours for prep too.
 
Sorry Jetman and anyone else scratching their heads, I meant the Weber OCR applied with a hawk and trowel. :-[
I assure you I'm now fully awake and will understand any answers given. ::)
 
doovde he means one coat render not pral you know the sand and cement in a bag grade 1 2 or 3
 
OCR goes off pretty quick this time of year , what finish are you doing andy sponged or scraped, if your going for a scraped finish then you can get a bit more on then if you were sponging it , hand applying it for a sponge finish then about 30-35m2 for a scraped finish then approx 35-45m2, how many of you are going to be laying it on
 
I haven't got any plans to use it at the moment Stu, it's just that it was suggested as being a quicker method than S,C&L in the post regarding the use of lime, I'm always open to suggestions regarding materials and methods so wanted to know how much quicker it could be. If I do end up using it, it will be for rubbed up finish if I need a scrapped finish you will get the call Stu.
 
it's definatly quicker andy as there is no need for a scratch coat it is as it say One Coat Render, it's nice gear to hand apply as well, nice and creamy
 
Status
Not open for further replies.

Share this page

Back
Top