Whats this

[John j]

Never seen it before tempted to cut it out with it being loose

 

[Cockney]

Never seen it before tempted to cut it out with it being loose
View attachment 37486

You might be opening a can of worms there buddy! Just f**k**g throw some bonding over it! Lol

 

[John j]

You might be opening a can of worms there buddy! Just f**k**g throw some bonding over it! Lol

Its bouncy though

 

[Cockney]

Its bouncy though

By the looks of it Bonding will tighten that up mate!

 

[carys]

Its bouncy though

Looks like a DIY lath plaster whith bonding and skim. Two options remove start again or bond over.

 

[Cockney]

Never seen it before tempted to cut it out with it being loose
View attachment 37486

 

[The Apprentice]

Never seen it before tempted to cut it out with it being loose
View attachment 37486

Used to be put on over damp areas I think it was called riblath or lathite but not sure

 

[John j]

With it being plastic I thought it could be for damp . .

 

[zombie]

Never seen it before tempted to cut it out with it being loose
View attachment 37486

Wack some Bonding over and embed someone flexi render mesh over top

 

[Niro06]

Newtonite lath if i remember right

 

[GM8]

I had the same thing in an old property that used to flood. It's some sort of old tanking, went over it with bonding as that is what was done previously. Had no issues.

 

[John j]

Put some bonding over it and scrim . See if its stopped bouncing in morning

 

[Tinytom]

Iv seen that around an old chimney before, it wasn’t plastic though some kind of bitumen soaked material

 

[zombie]

Put some bonding over it and scrim . See if its stopped bouncing in morning

I put that above but with render mesh!

Didn't want a thanks anyway tosser!!!!

 

[The Apprentice]

Newtonite lath if i remember right

I knew that, well I remember now

 

[smoother09]

I would zig zag some of tapits tape on there first tight coat of hardwall leave that for a day then fill out with bonding and add some fibres then leave that a day then blue grit the whole wall then back next day to skim. 3 days with materials £675

 

[John j]

I put that above but with render mesh!

Didn't want a thanks anyway tosser!!!!

Thank you so much. Wish I had some render mesh. Love ye xxx






If it's still bouncy in morning it's your f**k**g fault

 

[John j]

I would zig zag some of tapits tape on there first tight coat of hardwall leave that for a day then fill out with bonding and add some fibres then leave that a day then blue grit the whole wall then back next day to skim. 3 days with materials £675

Cant get that tape for love nor money

 

[tapit]

Iv seen that around an old chimney before, it wasn’t plastic though some kind of bitumen soaked material

A cadaver?

 

[Tinytom]

A cadaver?

Eh

 

[smoother09]

Cant get that tape for love nor money

They sell it in poundworld I think!

 

[Cockney]

They sell it in poundworld I think!

Yeah! I saw it marked up for 50p.

 

[smoother09]

Yeah! I saw it marked up for 50p.

Shouldn't make fun knauf are looking at it apparently! Mmmmmmmmm

 

[Cockney]

Shouldn't make fun knauf are looking at it apparently! Mmmmmmmmm

Load of b*ll***s! Lol