used it last week. onby 12 rubbed up 30m by 3
used it last week. onby 12 rubbed up 30m by 3
It will be fine as below you can rub it up after 2 to 3 hoursIs it worth doing it now or would It be better to use gp. Ocr hangs in the summer I've not used it in the winter months.
used jub carbon base.What brand did you use Dan
We sprayed 20m of parmurex last week. On by 10. Couldn't leave till 6.45! Just wasn't going off and we used 2 tubs of rapid which seem to not work at all!
This is what I was thinking would happen.
Sent from my iPhone using Tapatalk
We sprayed 20m of parmurex last week. On by 10. Couldn't leave till 6.45! Just wasn't going off and we used 2 tubs of rapid which seem to not work at all!
Sent from my iPhone using Tapatalk
If I had to go back next day I'd rather do it with gp render with 2 coats tbh.Stick it on late afternoon and finish next day?
Sent from my iPhone using Tapatalk
I think I'll do it with the gp put a scratch on Monday morning. Then go do another job. Go back next week and put the second coat of gp and float it. At least I'll know it will float up and shouldn't be hanging around.I don't know if I could trust it to float up next day. Scratching is fine but if it was 2 hard it's take off and re do. This is why I hibernate in winter.
Sent from my iPhone using Tapatalk
That soffit board looks well pissed - I guess it goes with the pissed ridge tiles
I don't give a f**k about the Ridge or the soffit. Not my problem is it. I'll render it to a high standard as all ways. I don't go to work to worry about other people's work.That soffit board looks well pissed - I guess it goes with the pissed ridge tiles
alright bobby big bollox. he said doing 35m2 and thats 30m2.Not surprised it's only 1 wall!!
Sent from my iPhone using Tapatalk
That soffit board looks well pissed - I guess it goes with the pissed ridge tiles
How the fook are you gonna get in there to render that?
Sent from my iPhone using Tapatalk
you must have lost weight to get down the side of that fence
It's very close to the ground dan. Not picking at your work just wondering why so low?
or a squad of skinny dwarfsI've got long arms
U looking for a days workor a squad of skinny dwarfs
Nice work mate. Was there no DPC?
It's very close to the ground dan. Not picking at your work just wondering why so low?
do you just want the beads on like ?U looking for a days work
Feck offStop picking at people's work
And set up the machine and clean it and do the guttersdo you just want the beads on like ?
i know. it was a hack off and redo. thats where dpc was 70mm to 95mm off ground. client accepted resposibility for level off the grounfIt's very close to the ground dan. Not picking at your work just wondering why so low?
know. it was a hack off and redo. thats where dpc was 70mm to 95mm offground. client accepted resposibility for level off the groundNice work mate. Was there no DPC?