Iain Cooper
New Member
Hi all,
I'm having to overboard my lathe and plaster ceiling due to various cracks appearing over the years.
I have marked out the joists and intend to strap across them with 25mm X 50mm at 300mm centres and board with 9.5x900x1800 plasterboard. ( easier for me to do on my own )
Then have a plasterer skim it and refit the coving.
My question is regarding staggering the joints on the plasterboard, best place to start, etc
Any advice and tips appreciated.
thanks
Iain
I'm having to overboard my lathe and plaster ceiling due to various cracks appearing over the years.
I have marked out the joists and intend to strap across them with 25mm X 50mm at 300mm centres and board with 9.5x900x1800 plasterboard. ( easier for me to do on my own )
Then have a plasterer skim it and refit the coving.
My question is regarding staggering the joints on the plasterboard, best place to start, etc
Any advice and tips appreciated.
thanks
Iain