My little bathroom has been gutted and I need to start boarding it after the plumber has done a temporary first fix.
Bearing it mind it is fully tiled which boards would you use for walls and ceilings.
Cheers
12.5mm for the ceiling/walls i would just use normal boards.Are you skimming them or just tiling straight into the board? maybe tilers like to spec their own boards if ya not skimming them..................:RpS_unsure:
Is this gonna be another 3 page thread like your bay window one Herds...............:rolleyes). Have you finished that yet?
Aqua boards in the shower area and normal boards with a tight skim will be sound or you can pay extra and get moisture boards.
Aqua boards in the shower area and normal boards with a tight skim will be sound or you can pay extra and get moisture boards.
walls:
is this right:
moisture board = more expensive but no need to skim before tiling
regular board = cheaper need to skim before tiling
Ceiling
just use regular board.
For mice ? Other than mice no, gap is different thing ,render off solid concrete floor,..not so fast, another question.
Do you board all the way to the floor leave a little gap
Ok cool, think i will go for regular boards, maybe 1 moisture one around the shower.
What does adding a skim to to a regular board do, just adds a bit more protection after they're tiled? Might get a mate round to do that as he wants to practice plastering.
No it don't cos strictly speaking Floor boards if fitted correctly by a joiner who knows his/her stuff they should not be touching the floor either ! :RpS_thumbup:the floor in the bathroom is ply, then tiled.
offtopic - but for some reason I thought that when you're boarding to a concrete floor to leave a gap at the bottom to stop damp. Thinking about it if a gap is left then skirt is added it kinda renders leaving a gap in the first place pointless?
No it don't cos strictly speaking Floor boards if fitted correctly by a joiner who knows his/her stuff they should not be touching the floor either ! :RpS_thumbup: