Search results

i wanted to go swinging once but the wife at the time didnt fancy it

we have run 2 machines on the same house at the same time, one doing gable the other on front. it would be fine Dave as the water setting will be about the same anyway. must admit , it was very impressive. we had ian bagging both machines as he had a bust foot and there was one spraying , one...

never watch porn gary, dont like seeing myself naked with a hard on

i cant see any machines on ebay

I must say that I am shocked that with all the members on here that nobody knows somebody who has a boy or girl ( lets not be sexist) who wants to better themselves, we took a lad on about 3 months ago who is working with stuart and he is going great guns and we have just put his money up. I...

yes it is email me at [email protected] if you answer YES to all the above, nick, im a moody ******* because your not allowed to beat s**t out of the labourer anymore, its against there human rights or something stupid but there not be working with me, there be working with...

if your going to bother with all that s**t then get a diesel. I wouldn't trust a labouer to take a piss let alone start adding additives

Look, dont listen to the sheep shagger, just dont do it, Ian has done it once thats a great test, once.

well boys you were right, no takers. it amazes me that nobody knows anyone who would be interested. they can talk the talk on here but im fcuked if the chancers can walk the walk.

not rushed of my feet just ******* stressed trying to sort the mess you leave me with every month. and i really enjoyed the coffee and sandwich that the bank supplied me before our meeting and all the coffee and biscuits while having our meeting, that was very stressful

the problem you have with using it with electric machines is you have to add the right amount to your water butt each time, so you will not be able to have a constant feed to your butt to keep it full you will have to let the butt drain right down, refill and add the accelerator, this is a right...

yes there is, ask les, he may sell you some but you cant run it through a electric machine.

He is looking at ways to get days off while me and ian keep the business going.

your welcome if you want her over there

andy, 3 of us sprayed 180m2 of internal cpi in a day, all ready for skim a few years back, i know cpi sounds more expensive but when you look at the labour cost involved with mixing, wheeling in and then hodding upstairs its a no brainer to me. If your doing internal cpi then you just spray all...

cheers stilton

its all about walking the walk, all we have found on here is people talking the talk and when someone comes along and offers the challenge they all run away , so come on, prove us wrong and walk the walk

who the Fcuk wants to go to wales

1) Right before we start PLEASE read the bloody add, if you dont tick the every box then dont contact us. 2) Were not discussing money on here so dont ask 3) if you not interested then move on and dont post stupid bloody messages. were looking for someone who would be interested in learning...

better take some cream cakes for stuart ( monkey)

on the day of the revolution my welsh friend we will send you back to the valleys where you can go back to eating your children , we will take your freedom and shag your wives, eat your sheep and return your land to the s**t hole it is. :RpS_thumbdn:

speak to Southern monkey mate, stuart is doing that area, im not doing one because blones has invaded from wales and now claiming to run the southwest as well . fcuking welsh

dont forget your back at sevenoaks in a week , lol

john, 200 is a bit low for a d6-3 , if the gear is a bit stiff then that a wear the stator out in no time.

I personally would look at applying a insulated render system as your hacking off the original, this will make a lot of difference with heating the house and also makes it a big benefit if you sale, the building control depending on your area could make you do anyway as your removing over 60% of...

no problem mate, if you dont ask you dont get.

Hi Mate, its not the time and amount of gear you use before checking filters , you can clean the filters and if some idiot decides to pull water form your barrel adding muck and dirt into your water system the filters can block in hours, even if you run off a stand pipe make sure you run it...

no mate, we have so much on we are struggling to do it so we need someone who knows what there doing

if you not interested then jog on,

That would need need baserend and fully meshed and then topped, no chance at £12 , like gibbo said, £20 is more in the ball park if you want a proper job done, but if you go cheap then please dont come back complaining a bad jobs been done. i dont really understand why people want cheap on the...

when you fit a new R&S in a clamp you only want to pinch the jacket so it holds in the clamp, if you over tighten it will make it too tight and give you all sorts of problems. It sounds like you have a leak somewhere , check to make sure the new R&S is sealed around the pressure plate. We dont...

im going to get shot down here and told off but i cant see the point in spraying finish

shut up you bunch of pussy's , i bet you would all be screaming the paddle was better than the electric mixing paddle when they first come out.

Gary, if you use the 40" spat it is quicker and makes the the second trowel easier. just waiting for matty boy to come alone and pick this video apart.

we never used it, they dont seem to push the product, we have asked leon for a colour chart loads of time but they cant seem to be bothered. its almost like there doing you the favour by supplying you.

spent 3 days there , the contractor cant get **** all ready so were chasing are arses , dont know if im back up or not. your brother is doing a bit for us somewhere. tell him i aint seen any cis details yet so get them emailed over so i can verify him. dont give it to stuart, i will never see it.

i dont get hang overs Gary, dont forget, i was bottled fed scrumpy as a baby so were hard core down here. :RpS_biggrin: but i am going to go round my mates, get his gun and shoot some clays with pictures of my ex wife on them. that will cheer me up :RpS_biggrin:

i would like to apologize for my post which i cant really remember writing so maybe i didnt. I think it must have been the other simply who drinks to much wine. I would like to say sorry to my best mate theblones for calling him a t**t. ( he knows i would never normally do this as a t**t is a...

that was bloody brilliant, how the **** do they work out these things, and thanks for the thought mate. Im sober now :RpS_biggrin:

fcuk off you t**t, i cant stand ******* pricks who have to pick things apart. cant look at what it is they have to find something wrong . ******* see it on here all the ******* time, most of the time by idiots who aint got a clue about what there on about. thats why i hardly come on here...

I filmed the demo mate and also finished the wall and I can promise you it was a dream to use . I sorry to say there's nothing wrong with the film unless your that anal about your films.

where are you in the country because it pays to buy your machine from a dealer near to you for service. there are a number all , you have stuart who is essex based, les lord in yorkshire, blones in swansea and me in somerset.

a machine

yes mate we have had one for over a year and its great, i have done 40m2 mono sprays using 20m of hose on my own with it, we used it spraying mp75 on stairwells which was great because one man can move it around no props, we have sprayed most of the basecoats and sprayed acrylic topcoat with it...

he cant eat them mate with his hands around his willy all the time

im around mate but spend all my time keeping Stuart out of wank tanks when were away

There's a job in sevenoaks were doing mp75 on and there looking for spreads to skim ceilings . If your near by i would pop in and ask to speak to the agent Mike. Its opposite the cricket ground and park. Site is called sackville.

i used fully meshed and highbond on my place, no problems

we are buying from ccf at 2.60 a roll but good stuff , sticks to brickwork well

we use the ritmo steve to spray it, spray it nice and wet in a splatter pattern. we also used a hopper gun connected to the comp, just a pain loading the gun all the time but fast as ****.