Search results

That's called laminate portion. It should have another 12.5mm board in the middle. It was all the rage 25 years ago.

As the song says, Its 5 o'clock somewhere!

Yes you can. Mostly you use it on really high metal partition walls in industrial sites. You have to use it across the end of every board on the staggered joints. Highest wall I had to use it on was 10m in a brewery.

Metal partition flat strap I think its called.

We do the same, its easier to gauge colour and it creams up lovely. So much nicer to put on and rule off.

Those screws will be fine for the battens, crack on.

600mm centers should be 15mm board.

The jewson bloke said they are going to source another brand but my mate could not remember what it was. Must be knauf.

A builder friend of mine was told yesterday by a jewson manager that bg told them it will be 6months before supply is back to normal.

These are best for dab. Great price as well.

M/R plasterboard, the most pointless thing in the building trade as anyone who has picked up a slightly damp one as it snaps over your back.

Do you mean hardwall or carlite bonding? If its bonding it's ok. Hardwall no.

Use clear plastic for vapour barrier. Don't forget to lap it 12in onto the ceiling to go under plasterboard.

It's called stramit partition. All stuck together then skimmed.

You could only bet £1. It's like giving you £100 of free bets to suck you in.

Sling screws and put drywall ones in.

I just mark the edge of the window board or the floor, dead easy to do.

Get yourself a decent strong magnet off ebay, take brackets off. Screw the screws in and skim over the top. When flat use magnet to find screws, unscrew then put brackets back on.

I have the same trowel, it is slightly dished. I think it's the design. They are my favourite make of trowel now. The 18in is great for laying on.

If anyone wants a cheap 240v mixer the vonhaus 1600w is great. It's way better than my EIBENSTOCK POWERMIXER 1800w 110v it's way more powerful. £59.99 bargain.

That will upset half of the forum, they don't sell handboards only hawks!

Yes

Strong ring 50mm Neodymium magnet.

Tape and joint it.

For the money this is really good. We have one for where we have 240v. It has more guts than 110v 1800 eibenstock. We put a bigger paddle on than the one it comes with.

Rubber bat knife.

In this day and age if you don't wear gloves, the thin one's you are a moron. Off e bay they are so cheap and after a week you don't know you have them on.

Build a reveal level horizontal to the bottom point of the window to form a shelf. It looks crap as it is

these are unreal for the money, its about 2 to 3 weeks delivery but well worth it.

I walked in to a asbestos aware course and the bloke said this is too late for you! I am 60.

What happened to the new version of the joddy that was coming out, have they given up on it. On the Multi marque web site about a year ago they banging on about it coming out soon.

It's coming home

2 hrs

Multi finish was a one coat plaster put on 3mm trowel back to 2mm.

How this any good for plastering. Google hand board this what comes up.

Google handboard . I'm 60 my dad taught me. Always a HAWK AND TROWEL! end of anything else made up. If you can go back further fair play but I doubt many on here can.

No such thing as a handboard, it's been made up Google it.

Go on you tube and search Kirk Giordano plastering. Loads of videos doing render over chicken wire.

Can't believe with a cast like that I never caught more! I must be losing my touch.

You have to 2 coat render block before putting alpine on.

They do make duplex fireline but must be as rare as rocking horse s**t. It would be easier to polythene ceiling then use ordinary fireline.

Pmsl!

So is multi finish to people on here! Some can use products some can't .

Drywall minimesh can be pushed in to those angles.

2 good pinches a bag

Use gun grade plasterboard expanding foam, sets in 10 minutes and then just easy fill top and bottom.

You have to take the touch screen health and safety test costs £21. Then renew it.