A 3-2 L, r&s

[Ftp321]

Anyone used a A3-2l r&s for better control with bucket coats?

 

[Olican]

@John j

 

[themucky1]

What’s the max lpm on them @Tom81

 

[smoother09]

R2d2 much better imo

 

[John j]

@John j

Yeah its s**t

 

[Ftp321]

What’s the max lpm on them @Tom81

Half as fast as the B415,
Think it works out to 1 lpm per thousand revs, 2000 revs per minute 2 litres per minute

 

[Ftp321]

Yeah its s**t

I'll give you a fiver for it please john

 

[themucky1]

Half as fast as the B415,
Think it works out to 1 lpm per thousand revs, 2000 revs per minute 2 litres per minute

That would be spot on for texture, you’ve got to buy the full unit though? Pressure and suction flange or is that the one without the pressure flange?

 

[Ftp321]

That would be spot on for texture, you’ve got to buy the full unit though? Pressure and suction flange or is that the one without the pressure flange?

Thought it was just a straight swap mate just longer pins

 

[Dansouthcoast84]

Thought it was just a straight swap mate just longer pins

@Wezly has one... im planning on stealing it off him.

smaller r s and clamp

 

[Ftp321]

@Wezly has one... im planning on stealing it off him.

smaller r s and clamp

Should just drop on the ritmo m then

 

[Wezly]

 

[Wezly]

You need the flanges for both ends as above.

 

[Ftp321]

You need the flanges for both ends as above.

would you recommend @Wezly, think it all comes in at about £500