Acrylic/silicone finish

[User___removed]

I have a job to fit ewi on some elevations on a property.
The client wants the finish to match the existing finish which is sand/cement.hes not keen on a 1.5mm grade.can anyone recommend which finish would be best suited
Cheers

 

[plasterjfe]

You can finish the base flat if you use the right product then use their acrylic paint.

Get a sample from Parex they do 0.5mm or similar see if he likes that.

Marmorit would be a good system for flat finish with their autol paint

 

[Dansouthcoast84]

I use jub basecoat and sponge finish then paint.
no warranty though. Used this finish on refurb havent on ewi

 

[User___removed]

I use jub basecoat and sponge finish then paint.
no warranty though. Used this finish on refurb havent on ewi

Tried that with maite once.looked ****.

 

[owls]

what jfe said,
although you cant hand apply 0.5 mm smooth needs spraying on.

 

[User___removed]

You can finish the base flat if you use the right product then use their acrylic paint.

Get a sample from Parex they do 0.5mm or similar see if he likes that.

Marmorit would be a good system for flat finish with their autol paint

That base what have to be mega flat and tidy with a 0.5 I imagine john?
Done plenty of 1.5 so know how the base coat needs to be finish to receive

 

[richardbrown]

I have hand applied smooth no problem!?.

Finish with sponged parinter and paint