Vincey
Private Member
And we should if we want the business.
Aero therm
- Thread starter gps
- Start date
Discovery channel Is class.Anyways have u seen checkatrade adverts? There paid £250,000 on these I know this as my mate wrks in advertising me old mucker
D
Deleted member 29624
Guest
I not seen the checkatrade adds thats probably why they paid 250....are they on n the middle of the day when anyone with money is at work, or late at night when the employed are sleeping ready for their next day at work
zolco
Private Member
Thing is we all argue about it on here while others jumped on it but no words from them let alone any pictures as if anyone have ever installed any of this gear. Not sure why you need a course, seems simple enough cover exterior walls then sand back, you can get a notched trowel for a fiver and a sanding pad for a pound might as well invest in a damp meter for a tenner and off you whizz. But then tell me as a plasterer how you going to warrant your work if there's no obvious saving for the client? Are you gonna top up their heating bill from your own pocket till you die or aerotherm gonna foot the bill or they just gonna say it's applicator error to get out of it and leave you in a sh*t?
Sent from my Nexus 6P using Tapatalk
Sent from my Nexus 6P using Tapatalk
Sponsored cowboy builders programme with big dom littlewood and another prog which cnt remember
Vincey
Private Member
zolco
Private Member
That's the business model [emoji12]Fare enough
But I'm sure the putz notch is £35
Sent from my Nexus 6P using Tapatalk
Where though ? I remember reading a post from @Danny saying it was being installed up and down the country.
Vincey
Private Member
Got to say you were right in what you were pointing out before , if I honest iwi is a good sell for me on the types of s**t holes I do most of my work if it's a room at a time it's within people kind of budget and the heat difference is good.if asked what I would advise I always say the thickest they can afford (50mm -90 mm) 9 out of ten will decide on 27 mm
I not looked into aero enough or know enough to really say it's worth pushing to public and if @imago is correct (which I don't doubt ) then that's that.
And as we all know reality is public basically don't want to pay for any work done full stop that is the truth really of plastering game they want nice rooms and buildings at next to no cost.
Always come down to cost.
Feel like I'm turning into @theclemo
I still cant understand y any1 wud want to spend money and use extra time...y wud u want a gage hanging around..i cant imagine any gage being 2 big in the domestic world and u wudnt get site plasterers rolling up with a box of sachets of extra time ud be laughed out of the building with ur box of sachets in hand..i can imagine a diy man using it to do a wat seems big wall to them so there can get to grips and have a play with itForget TV the internet obits own would be enough I could knock out a professional advert for unde a grand no probs. have you seen the extra time one that probably only cost a mug and pint glass
zolco
Private Member
Personally I don't see any real benefit of it other than as if you can flog it you can make money out of it, for some that's the real deal. I'm always open to new ideas but I don't think it's cost effective at allGot to say you were right in what you were pointing out before , if I honest iwi is a good sell for me on the types of s**t holes I do most of my work if it's a room at a time it's within people kind of budget and the heat difference is good.if asked what I would advise I always say the thickest they can afford (50mm -90 mm) 9 out of ten will decide on 27 mm
I not looked into aero enough or know enough to really say it's worth pushing to public and if @imago is correct (which I don't doubt ) then that's that.
And as we all know reality is public basically don't want to pay for any work done full stop that is the truth really of plastering game they want nice rooms and buildings at next to no cost.
Always come down to cost.
Feel like I'm turning into @theclemo
Sent from my Nexus 6P using Tapatalk
Got to say you were right in what you were pointing out before , if I honest iwi is a good sell for me on the types of s**t holes I do most of my work if it's a room at a time it's within people kind of budget and the heat difference is good.if asked what I would advise I always say the thickest they can afford (50mm -90 mm) 9 out of ten will decide on 27 mm
I not looked into aero enough or know enough to really say it's worth pushing to public and if @imago is correct (which I don't doubt ) then that's that.
And as we all know reality is public basically don't want to pay for any work done full stop that is the truth really of plastering game they want nice rooms and buildings at next to no cost.
Always come down to cost.
Feel like I'm turning into @theclemo
I liked what you was saying right up to the point you said people do want to pay for nice rooms or pay for any work done full stop, that in my opinion is b*ll***s
Rossi46
Private Member
There could be certain situations where it could be handy once or twice. Big ceiling on a hot day. A gauge with a lot of awkward bits and angles like a loft. A gauge is as big or as small as you want it to be. 1 bed flat or Buckingham palace. Doesn't matter whether it's domestic or site.
Anyway who gives a f**k what other people on site think. They could laugh at me all they like I'd just get on with what I'm doing. Site bitches
theclemo
Private Member
Got to say you were right in what you were pointing out before , if I honest iwi is a good sell for me on the types of s**t holes I do most of my work if it's a room at a time it's within people kind of budget and the heat difference is good.if asked what I would advise I always say the thickest they can afford (50mm -90 mm) 9 out of ten will decide on 27 mm
I not looked into aero enough or know enough to really say it's worth pushing to public and if @imago is correct (which I don't doubt ) then that's that.
And as we all know reality is public basically don't want to pay for any work done full stop that is the truth really of plastering game they want nice rooms and buildings at next to no cost.
Always come down to cost.
Feel like I'm turning into @theclemo
Your getting there. I've been saying this year's plastering is a s**t trade to be in.
I priced at 8m2 wall to mono labour only €220 dickhead says to me your expensive. I say why is that. He says i just thought it would be cheaper than that. I just looked right at him and said your f**k**g wasting my f**k**g time. His face dropped. I honestly don't care anymore I won't drop a penny off my price anymore. The next time someone trys to get me down on price am going to stand there looking like am thinking for about 10 sec and then say when I think of it am going to have to ask for more money as I think I was under pricing my slef.
Dont you think there have amateur written all over them Rossi? If ceilings 2 big just get a move on lol..cud just imagine using some and gage never going off then not having time to put another gage on so ud lose money anyway by only putting 1 gage onThere could be certain situations where it could be handy once or twice. Big ceiling on a hot day. A gauge with a lot of awkward bits and angles like a loft. A gauge is as big or as small as you want it to be. 1 bed flat or Buckingham palace. Doesn't matter whether it's domestic or site.
Anyway who gives a f**k what other people on site think. They could laugh at me all they like I'd just get on with what I'm doing. Site bitches
Its not all doom and gloom clemo £350 a day I was clearing last week wen was rendering..im thick as pig s**t really and there doctor wagesYour getting there. I've been saying this year's plastering is a s**t trade to be in.
theclemo
Private Member
If only it was 350 every day lol. What about the days we make f**k all. The bullshit pricing buying tools and the rest of the s**t lol f**k me don't get me started lol I love plastering really
Rossi46
Private Member
They are a bit amateurish but I can see in certain situations they might help. Why f**k yourself over on a killer gauge when you could slow it down a little. I don't use them but I know when I'm doing lofts mid summer there'll be that gauge that's an absolute bitch I wish I had a bit more time with.
I hate lofts..was boarding 1 thursday just gone and was torture with the heat lads were in nxt door flat skimming and we were just laughing saying thank f**k we rnt skimming..poor bastards shud of seen em there were dripping
Ye know wat ur saying but dnt do 2 bad..id be f**k*d without plastering its been gud to me tbh
theclemo
Private Member
It's been good to me 2 tbh. But I f**k**g hate it lol I don't have work Monday and am delighted
I'm not at the hating stage thank god..its battered me body wise but Il take it wen I'm older I'm really not arsed about that u get out wat u put in end of day taking my 2 kids to Disney world for 2 weeks in August and its all because of plastering lol..It's been good to me 2 tbh. But I f**k**g hate it lol I don't have work Monday and am delighted
Vincey
Private Member
How old are you kitchy ?
theclemo
Private Member
I know a bloke that went to Disney for a week with his kids he was on the dole ffs he did the odd day here and there working. By the way it's not plastering that paid for it it's your work ethic that did.
32 Vince..