Any1 used this shite

[Pl plastering]

As above..I've used plenty of limelight which I hate,I've been told this is better gear.

 

[zombie]

As above..I've used plenty of limelight which I hate,I've been told this is better gear.

Bang same as limelite. They used to say could use multi on top but have since changed there spec and need there finish on top to prevent issues.

 

[Retired Spread]

better gear in what way?

 

[Pl plastering]

Bang same as limelite. They used to say could use multi on top but have since changed there spec and need there finish on top to prevent issues.

Ye it says that on back do not use multi finish..I've used that high impact b4 it's expensive,guy has bought a load of multi.hustled me into doing the c**t.2 of walls are old Yorkshire stone aswell deep as.told him its guna take 2-3 coats,I've done same job b4 with limelight and was a t**t very time consuming

 

[Pl plastering]

better gear in what way?

Originally he said its soverign which I havnt used,I said to him on phone if it's like limelight I dont want the job,his words were oh it's nice to use,spreads like hardball so I've agreed job..just guna skim all ceilings and studs and dotting upstairs and if he dsnt pay what I want for doing the backing coat I ain't doing it

 

[Retired Spread]

Originally he said its soverign which I havnt used,I said to him on phone if it's like limelight I dont want the job,his words were oh it's nice to use,spreads like hardball so I've agreed job..just guna skim all ceilings and studs and dotting upstairs and if he dsnt pay what I want for doing the backing coat I ain't doing it

it's cement based just like Limelite and dri-coat can't imagine it being any different to be honest

 

[Pl plastering]

it's cement based just like Limelite and dri-coat can't imagine it being any different to be honest

That was what I said to the c**t,hes like no it spreads nice and miles better than limelite..not doing until nxt tues

 

[Pl plastering]

it's cement based just like Limelite and dri-coat can't imagine it being any different to be honest

Dri coat is miles better to use than limelight

 

[Djr]

Originally he said its soverign which I havnt used,I said to him on phone if it's like limelight I dont want the job,his words were oh it's nice to use,spreads like hardball so I've agreed job..just guna skim all ceilings and studs and dotting upstairs and if he dsnt pay what I want for doing the backing coat I ain't doing it

The sovereign gear is ok aswell used loads of it in the past

 

[jamesthefirst]

Just skim it with board finish it will be fine, i key up next day when gone off or same day if ive got to leave for a week.

 

[zombie]

Just skim it with board finish it will be fine, i key up next day when gone off or same day if ive got to leave for a week.

Your massively wrong there pal

 

[zombie]

Ye it says that on back do not use multi finish..I've used that high impact b4 it's expensive,guy has bought a load of multi.hustled me into doing the c**t.2 of walls are old Yorkshire stone aswell deep as.told him its guna take 2-3 coats,I've done same job b4 with limelight and was a t**t very time consuming

It is better gear to spread and rule than limelite...though like all those products hard work and slump if trying to build up to much depth

 

[Pl plastering]

It is better gear to spread and rule than limelite...though like all those products hard work and slump if trying to build up to much depth

2 inches in places..done it b4,built up and built up etc with limelite..aslong as it rules better..you skimmed it with multi zombie back in the day? Got 26 multi and 10 more coming tuesday..

 

[Pl plastering]

Your massively wrong there pal

Why zombie have you skimmed with multi on it?

 

[Pl plastering]

Just skim it with board finish it will be fine, i key up next day when gone off or same day if ive got to leave for a week.

Does it hang like when you skim limelite?

 

[Pl plastering]

The sovereign gear is ok aswell used loads of it in the past

This is what I agreed to use but apparantly none in stock..didnt even tell me until I opened my present today when it got dropped

 

[jamesthefirst]

Does it hang like when you skim limelite?

i havnt used it but carl says its like dri coat so might hang a little (using board fin) but nothing like limelite finish does!

 

[martinemj]

Used loads limelight renovating and finish
Great stuff...

 

[Pl plastering]

Should be fun then going over this shite with it

 

[Pl plastering]

Used loads limelight renovating and finish
Great stuff...

I've used loads of limelite,hate the stuff

 

[martinemj]

Hate it compared to what?

I don't like the cost of it though

 

[Djr]

I've used loads of limelite,hate the stuff

Its good gear limelite I dont mind it makes a change from dab and skim bores the pants off me that shite does

 

[Pl plastering]

Hate it compared to what?

I don't like the cost of it though

Compared to hard wall or ocr..might be because I did 7 cottages in a row using the f**k*r..price is as tight as a nuns vagina aswell,that's probably why I'm saying I hate the f**k*r

 

[zombie]

Why zombie have you skimmed with multi on it?

Yes and like limelite backing can burn through the skim and turn it to dust

 

[FreeD]

Should be fun then going over this shite with it

I'd be battening and boarding that one...could use insulated boards. I've used alot of Permaguard renovating plaster...but can't build out quickly had to do it in several coats otherwise it slumps. I dry line everything these days if i can.

 

[Pl plastering]

I'd be battening and boarding that one...could use insulated boards. I've used alot of Permaguard renovating plaster...but can't build out quickly had to do it in several coats otherwise it slumps. I dry line everything these days if i can.

Mate believe you me this isnt my option..

 

[Pl plastering]

Yes and like limelite backing can burn through the skim and turn it to dust