anyone used the dashing gun and compresser from les at pft

[Putzmiester]

got one on order for a big job were doing .is it any good/tips /advise pls lads:RpS_thumbup:

 

[lucius]

got one on order for a big job were doing .is it any good/tips /advise pls lads:RpS_thumbup:

Never heard of one mate, do you have a link or anything on u tube

 

[Rigsby]

got one on order for a big job were doing .is it any good/tips /advise pls lads:RpS_thumbup:

If it works well can you invite me down to have a look at it in action?

 

[g5johnney]

go on utube and type inpft northern dashing gun its the nuts

 

[g5johnney]

pft northern dashing gun

Ive seen the test panel les done very even and no problems with getting round saffold poles

 

[gooner59]

PFT NORTHERN PEBBLE DASHING GUN 3gp - YouTube that is crazy it looks like it could go very wrong if the pressure went uneven .....

 

[gooner59]

Also looks like a fair -bit of re-bound !! not sure , you would still have to keep loading the hopper, so you would still have buckets of spa -up there with you as well !!......

 

[owls]

theres a few about now for machines,
q tech have one on there 250 model that ive had a go with, as long as the spas less than 8mm

 

[Putzmiester]

Yeah it was new to me too should have it by the weekend will keep you all posted on how we get on fingers crossed ,must say it looks the b*ll***s can't wait to use it ,new toy yaaaa

 

[Putzmiester]

Yes mate ill invite you down if you like once we've had a go ill post

 

[g5johnney]

far less than with aharling trowel and bucket if your worried about rebound make astrecher up to catch stones and put back in bucket or dashing gun you do this after your top coat then all the stones stay clean

 

[Rigsby]

Yes mate ill invite you down if you like once we've had a go ill post

Thanks. Where's herts?

 

[adapt]

how did you get on with the dashing gun?

 

[Putzmiester]

**** haha in the end they let there regaular guys use it and to b honest glad they did it looked very patchy maybe they weren't using it right looks like a really good bit of kit but my finish by hand was a lot better

 

[Rigsby]

So anyone else used one? PFt Wales vid looks impressive.