Art deco cornice and a sloped ceiling

[mikeadams1985]

Fitting some art deco to a ceiling with a pitch on it but too.make it more interesting it's two different sized cornices that have to meet and run into each other.

MJ Adams
07841919406
Fibrous plaster mouldings.

 

[FrankNewman275]

Hi mike , are you referring to a raking mould
Where you have a 90 degree angle meeting in with a differant angle


I'm using The Plasterers Forum Mobile App

 

[mikeadams1985]

That's the word I was after. Long day. Blank mind lol.



www.michaeljadams.co.uk
07841919406
Fibrous plaster mouldings.

 

[seanlar]

It don't work that we'll on the angle you will have to do the corners by hand

 

[mikeadams1985]

I know. Hopefully box it off today

www.michaeljadams.co.uk
07841919406
Fibrous plaster mouldings.

 

[mikeadams1985]

So far so good

www.michaeljadams.co.uk
07841919406
Fibrous plaster mouldings.

 

[northstaffsplastering]

thats going to be difficult , will you post a picture of the mitres please when completed


regards paul at north staffs plastering.

 

[mikeadams1985]

Will do mate. Will post pictures later tonight.

www.michaeljadams.co.uk
07841919406
Fibrous plaster mouldings.

 

[smalljob]

great job mike, all the best for Christmas and new year.:RpS_thumbsup:.

 

[NickHarris]

My old Guvner used to call it 'Running on a Ramp' !

 

[NickHarris]

I've just had a notice from my skip company that they will no longer be able to put Gypsum in landfill - Any suggestions ???

 

[FrankNewman275]

I've just had a notice from my skip company that they will no longer be able to put Gypsum in landfill - Any suggestions ???

We used to deal with a company that took gypsum only in their skip, to sell on, unfortunately they went bust
You best talk to the supplier gypsum /Lafarge , but of a nuisance

 

[FrankNewman275]

Hi ryan , what do you need to know ?
Sounds like a hallway or sloped ceiling
A straight profile . An obtuse profile and an acute profile,
The only problem I have had with jobs like this is convincing the client he has to fork out for three moulds,



Irish Fine Art Plasterwork

 

[FrankNewman275]

No problem Ryan , it can be difficult to get your head around, it's just geometry
We don't need to do it often , but all my lads run from it,
I'll send you something tomorrow


Irish Fine Art Plasterwork

 

[FrankNewman275]

Ryan if you can send me by email the profile , and the two angles , I normally use a bevel,
I can send you back the profiles with an explanation of how I got them ,
It's [email protected]

Regards

Frank


Irish Fine Art Plasterwork